★ You know the width of the back Full ver + WIDE (★背幅分かる君Full ver+WIDE) ★背幅分かる君Full ver+WIDE

Content ID:2015583

  • 1,201
  • Free
This material collection includes materials that can be used in Studio Mode. (What is Studio Mode?)

I was looking at ASK, "I'm hard to understand the dragonfly of the width of the back" Certainly, it is a material made.
The unit is scaled along the finish line you set when you created the file, so the units work in px, MM and inch.
ASKを見ていて、「確かに背幅のトンボって分かりづらいよな~」と思って作った素材です。
ファイル作成時に設定した仕上がり線に沿って拡大縮小するので、単位はpxでもmmでもinchでも動作します。

※ In relation to dealing with the multiple pages of the spread, it does not work properly if it is not "CLIP STUDIO PAINT EX" .
* The marks are created based on the CLIP STUDIO PAINT dragonflies. It does not work properly on a canvas that does not have a dragonfly for the back-width facing cover.
Spaghetti

2023/07/11
Added "Back width Full version WIDE" ★.
It is the auto action which extended the fill to the canvas instead of the finish line and added the fill to the back width.
* It may take some time depending on the work environment because the whole fill etc. are carried out.
It is easy to take a selection for the mask when I draw the selection of the back width, table 1, table 4.

■ □ ■ □ ■ □ ■ □ ■ □ ■ □ ■ □ ■ □ ■ □ ■ □ ■ □ ■ □ ■ □ ■ □ ■


The dragonfly of the back width of the cover facing is difficult to understand... Which one is a dragonfly of the width of the back?
The back width is plainly difficult to understand is auto action.

Auto action "★ Back width Full Version" is performed and the white back width is visible in the center.
It becomes the work while the folder is displayed, and delete material by pulling a guide to the width of the back and it is your favorite.


* A folder is created on top of the selected layer.

※ Because the range is decided by the dot of course, it is not 1px and does not seem to protrude tightly, but, because it is a fate of digital "roughly around here", please look with a generous eyes.


Registering for a command bar or quick access will save you from looking for a set auto action.
It is simple but I made an icon, please use it when I register such as a command bar.
↓ (Open this page in your browser and drag and drop the image to the desktop or the folder you want to save.) )

※見開きの複数ページを扱う関係上「CLIP STUDIO PAINT EX」でなければ正常に動作しません。
※CLIP STUDIO PAINTのトンボを基準に作成します。背幅のついた見開き表紙用のトンボが作成されていないキャンバスでは正常に動作しません。
悪しからず!

2023/07/11
「★背幅Back width Full version WIDE」を追加しました。
仕上がり線ではなくキャンバスまで塗りつぶしを拡張+背幅にも塗りを追加したオートアクションです。
※全面塗りつぶし等を行うので作業環境によっては少し時間がかかる可能性があります。
背幅の選択範囲をとる、表1・表4を描くときのマスク用の選択範囲をとる、などがしやすくなります。

■□■□■□■□■□■□■□■□■□■□■□■□■□■□■


見開き表紙の背幅のトンボが分かりづらい…どれが背幅のトンボなの…?
という地味に分かりづらい背幅が分かりやすくなるオートアクションです。

オートアクション「★背幅Back width Full version」を実行すると中央に白い背幅が見えるようになります。
あとはフォルダを表示したまま作業するなり、背幅にガイドを引いて素材を削除するなりお好みでどうぞ。


※選択しているレイヤーの上にフォルダが作られます。

※当然ですがドットで範囲が決まるので、きっちりとmmではなく1pxはみ出たり足りなかったりしますが、デジタルの宿命なので「大体ここらへん」とおおらかな目で見てやってください。


コマンドバーやクイックアクセスに登録しておくとオートアクションセットを探す手間も省けると思います。
簡易ですがアイコンも作ったので、コマンドバーなどに登録する時に使ってください。
↓(ブラウザでこのページを開き、画像をデスクトップや保存したいフォルダにドラッグ&ドロップすると保存出来ます。)

Category 1 カテゴリ1

Update history

2023/07/11 Added "★ Back width Full version + WIDE" 2023/07/11
「★背幅Back width Full version+WIDE」を追加

Old version

Content ID:2015583

Published : 9 months ago

Last updated : 9 months ago

たけのこきのこ's profile Go to profile

主に漫画用の素材を公開してます。基本的に印刷前提なので大きめです。 twitter始めました。→@take_ki_noko

Other materials by たけのこきのこ

Popular “Material catalog” materials

New materials