It is a shoe box. 20 squares in 5 rows × 4 tiers, with doors. One square is 300 mm wide × 220 mm high × 350 mm deep, and the total is 1,608×350 × 1,050 mm. Each of the 20 doors is an independent part, and the fulcrum is placed on the line of the hinge. You can choose the door and open it as it is. The upper shoes are in all 20 pairs and can be seen in the back of the door. The door has a handle and a name tag holder. The origin is the center of the floor surface, and the front is in the −Y direction. If you arrange them side-by-side, the elevator entrance will be all over the place. Includes 4 angles: front, back, right, and left. 下駄箱です。5列×4段の20マス、扉付き。1マスは幅300×高さ220×奥行350mmで、全体は1,608×350×1,050mm。扉20枚はそれぞれ独立した部品で、支点は丁番の線上に置いてあります。扉を選んでそのまま開けられます。上履きは20足すべてのマスに入れてあり、扉を開けた奥に見えます。扉には取っ手と名札ホルダーが付きます。原点は床面の中心、正面は−Y方向。横に並べれば昇降口が一面になります。正面・背面・右・左の4アングル入り。
About this material
It is a shoe box unit × 5 rows 4 rows = 20 squares. 20 doors and 20 pairs of upper shoes (left and right are also separate) are separate parts. The four photos below are the angles registered for this material.
How to open the door
All 20 doors are independent parts, and the fulcrum is on the line of the street. Select the door and turn it around the Z axis to open the hinge.
- You can create a state where only one sheet is ajar and only the upper row is fully opened.
- The door has a handle and a name tag holder. Even if you get close, it will have a face.
Upper shoes
It is placed in all 20 squares. In addition to the main body, the soles, toes, and instep bands are made of different materials, so a line appears as a boundary between the materials even at the back of the door.
Since the left and right object are separated, you can also set it to hide only one of them.
4 angles
Four items are registered: front, back, right, and left. If you choose from the tool property (sub tool detail "Camera" → "Angle"), you will get the same composition as in the image above.
LT Conversion
Below is the main line converted to LT with the actual CLIP STUDIO machine.
Specifications
- Overall 1,608 × 350 × 1,050mm/1 mass 300 × 350 × 220mm (5 rows×4 rows)
- 20 doors (independent parts, fulcrum is on the street line) / with handle and name tag holder
- 20 pairs of upper shoes (body, soles, toes, and instep bands separated by material)
- 4 angles (front, back, right, left)
- Origin: Center of floor surface / Front: −Y direction
この素材について
5列×4段＝20マスの下駄箱ユニットです。扉20枚と上履き20足(左右も別)が別部品になっています。下の4枚は、この素材に登録してあるアングルです。
扉の開け方
扉は20枚とも独立した部品で、支点は丁番の線上にあります。扉を選んでZ軸まわりに回すと、丁番を軸に開きます。
- 1枚だけ半開き、上の段だけ全部開き、といった状態が作れます
- 扉には取っ手と名札ホルダーが付きます。寄っても面が持ちます
上履き
20足すべてのマスに入れてあります。本体のほかに靴底・爪先・甲のバンドを別のマテリアルにしてあるので、扉を開けた奥でも材質の境目として線が出ます。
左右のオブジェクトを分けているので片方だけ隠すという設定もできます。
アングル4件入り
正面・背面・右・左の4件を登録してあります。ツールプロパティ（サブツール詳細の「カメラ」→「アングル」）から選ぶと、上の画像と同じ構図になります。
LT変換
下はクリスタの実機でLT変換した主線です。
仕様
- 全体 1,608 × 350 × 1,050mm／1マス 300 × 350 × 220mm（5列×4段）
- 扉20枚（独立部品・支点は丁番線上）／取っ手・名札ホルダー付き
- 上履き20足（本体／靴底／爪先／甲のバンドをマテリアルで分離）
- アングル4件（正面・背面・右・左）
- 原点：床面の中心／正面：−Y方向
Material マテリアル
-
default material 初期マテリアル
Configuration 配置
-
default layout 初期レイアウト
Angle アングル
-
Front 正面
-
The backside 背面
-
Right 右
-
Left 左
Update history
2026/10/3 Material review (accuracy improvement, material addition, outline line clarification), angle registration
2026/10/3 素材見直し（正確性向上、マテリアル追加、輪郭線の明確化）、アングルの登録
Old version
Other materials by Didymoi.A
Popular “3D object” materials
New materials
-
MVP ◆This user has contributed greatly to the management of the community, by posting many great responses to the questions asked. Once every three months, MVPs are determined based on the points earned during that period and will be recognized accordingly. -
New Valuable Player (NVP) ◆These are the next-best contributors to the community after MVPs. This is awarded to users who have not yet won an MVP award, based on the number of points they have earned. -
Official Expert ◆Chosen out of all MVP awardees, who are already proof of excellence, this is a testimony of outstanding correspondence in the community. After careful screening, they are appointed by CELSYS and assume their position.Note: Formally called “Evangelists” -
Official Moderator of CELSYS ◆Moderators are official CELSYS staff members who are fluent in Japanese as well as various other languages. Moderators are not experts on the software or illustration, so they are not able to directly answer your questions. However, moderators provide communication and language support to ensure that everyone can smoothly communicate with each other. -
CELSYS official accountThe Official Administrator Account