Refrigerator (500L class) (冷蔵庫(観音開き・500Lクラス)) 冷蔵庫(観音開き・500Lクラス)

Content ID:2310659

  • 965
  • Free
This material can be used in Studio Mode. (What is Studio Mode?)

It is a refrigerator that opens for home use. 500L class with a width of 700 × depth of 700 × a height of 1,830 mm. Two doors of the refrigerator compartment and three drawers of the freezer compartment and vegetable compartment move independently. The left and right outer edges of the door are fulcrums, so only one of them can be opened. The drawer has a fulcrum in the center of the front, and when you pull it forward, a step appears. The inside of the cabinet is made up to 3 shelves and 4 door pockets, so even if you open it, it will not be hollow. The origin is the center of the floor surface, and the front is in the −Y direction. Includes 4 angles: front, back, right, and left. 家庭用の観音開き冷蔵庫です。幅700×奥行700×高さ1,830mmの500Lクラス。冷蔵室の扉2枚と、冷凍室・野菜室の引き出し3段がそれぞれ独立して動きます。扉は左右の外端が支点なので、片方だけ開けられます。引き出しは前面中央に支点があり、手前へ引くと段が現れます。庫内は棚板3枚とドアポケット4個まで作ってあるので、開けたカットでも空洞になりません。原点は床面の中心、前面は−Y方向です。正面・背面・右・左の4アングル入り。

About this material

It is a 700×700×1,830mm kannon opening refrigerator. The top is a cold room (2 doors), and the bottom is 3 drawers. In total, 5 places move separately.

Moving parts (5 places)

  • 2 doors of the refrigerator compartment — the fulcrum is the left and right outer edges. Only one side can be opened.
  • 3 drawers — the center of the front is the fulcrum. Pull in the Y direction to get a step.

Inside the cabinet

In order not to be hollow when the door is opened, there are 3 shelves and 4 door pockets. The shelves do not have the front edge in front of the inner surface of the door, so they do not interfere when closed.

4 angles

Four items are registered: front, back, right, and left.

LT Conversion

Below is the main line converted to LT with the actual CLIP STUDIO machine.

Specifications

  • 700 × 700 × 1,830mm (500L class)
  • Cold room: 2 doors (the fulcrum is the left and right outer edges) / 3 drawers (the fulcrum is the front center)
  • Inside: 3 shelves and 4 door pockets
  • Handle: φ34 round pipe (front at 2 brackets)
  • 5 movable parts (2 doors, 3 drawers)
  • 4 angles (front, back, right, left)
  • Origin: Center of the floor surface/Front surface: −Y direction

この素材について

700×700×1,830mmの観音開き冷蔵庫です。上が冷蔵室(観音扉2枚)、下が引き出し3段。全部で5か所が別々に動きます。

動く部分(5か所)

  • 冷蔵室の扉2枚 — 支点は左右の外端。片方だけ開けられます
  • 引き出し3段 — 前面中央が支点。Y方向へ引くと段が出ます

庫内

扉を開けたときに空洞にならないよう、棚板3枚とドアポケット4個を入れてあります。棚板は前端を扉の内面より手前に出していないので、閉じたときに干渉しません。

アングル4件入り

正面・背面・右・左の4件を登録してあります。

LT変換

下はクリスタの実機でLT変換した主線です

仕様

  • 700 × 700 × 1,830mm(500Lクラス)
  • 冷蔵室:観音扉2枚(支点は左右の外端)/引き出し3段(支点は前面中央)
  • 庫内:棚板3枚・ドアポケット4個
  • 取っ手:φ34の丸パイプ(ブラケット2点で前出し)
  • 可動部5か所(扉2・引き出し3)
  • アングル4件(正面・背面・右・左)
  • 原点:床面の中心/前面:−Y方向

Material マテリアル

  • default material 初期マテリアル

Configuration 配置

  • default layout 初期レイアウト

Angle アングル

  • Front 正面
  • The backside 背面
  • Right 右
  • Left 左

Update history

2026/10/3 Material review (accuracy improvement, material addition, outline line clarification), angle registration 2026/10/3 素材見直し(正確性向上、マテリアル追加、輪郭線の明確化)、アングルの登録

Old version

Content ID:2310659

Published : 11 hours ago

Last updated : 11 hours ago

Didymoi.A's profile Go to profile

興味をもっていただきありがとうございます! 私は漫画家をやっています。漫画で利用する素材などをBlenderを使って作成しています。たくさんアップしますのでフォローお願いします。Xでも制作過程を乗せていますのでフォローやいいねなど反応していただけると嬉しいです。また仲良くしていた方限定で制作要望を承る場合がありますのでダイレクトメッセージください。

Other materials by Didymoi.A

Popular “3D object” materials

New materials