It is a round trash can that opens the lid when you step on the pedal. The fuselage is φ300 and the overall height is about 630mm. The lid is hinged at the back, and the pedal is on the front axis as a fulcrum, so the depth of step and the degree of opening of the lid can be determined separately. An interlocking rod is passed between the pedal and the lid, and one rod stands from the base of the pedal to the hinge of the lid. The inner ring and inner tube of the mouth are inserted at the top of the torso, so it does not become hollow even when the lid is opened. The pedals have non-slip treads and four rubber feet on the bottom. The origin is the center of the floor surface, and the side with the pedal is in the −Y direction. Four angles are registered: front, back, right, and left. ペダルを踏むとフタが開く丸型のゴミ箱です。胴はφ300、全高およそ630mm。フタは後ろのヒンジ、ペダルは前の軸をそれぞれ支点にしてあるので、踏み込みの深さとフタの開き具合を別々に決められます。ペダルとフタのあいだには連動ロッドを渡してあり、ペダルの根元からフタのヒンジまで1本の棒が立ちます。胴の上端には口の内側のリングと内筒を入れてあるので、フタを開けても空洞になりません。ペダルには踏み面の滑り止め、底には4つのゴム脚が付きます。原点は床面の中心、ペダルのある側が−Y方向です。正面・背面・右・左の4アングルを登録してあります。
About this material
This is a pedal-type trash can with a diameter of 300 and a total height of 630 mm. The lid and pedal move separately, and an interlocking rod connects them. The four photos below are the angles registered for this material.
Moving parts
- Lid — The back hinge is the fulcrum. Lifts when rotated around the X-axis
- Pedal — The previous axis is the fulcrum. When you step on it, the tip goes down
Since the fulcrum is separate, you can create a state where the lid is ajar in the middle of stepping. The angle at which the pedal is depressed and the angle at which the lid is opened are not linked, so choose a combination that fits the picture.
Where it is not visible as a hollow
When the lid is opened, the following is inserted so that the body does not look like just a tube.
- Inner ring of mouth — a single black rubber rim at the top edge of the torso
- Inner cylinder — there is another side inside the body that does not come out of the bottom when peeking through the mouth
- Interlocking rod – from the base of the pedal to the hinge of the lid, one rod stands behind the torso
4 angles
Four items are registered: front, back, right, and left. If you choose from the tool property (sub tool detail "Camera" → "Angle"), you will get the same composition as in the image above.
LT Conversion
Below is the main line converted to LT with the actual CLIP STUDIO machine.
Specifications
- Fuselage φ300 × Height approx. 630mm
- Parts: Body, lid, pedal (with non-slip), interlocking rod, inner ring of mouth, inner cylinder, garbage bag, rubber leg 4
- 2 moving parts (lid = rear hinge / pedal = front axis)
- 4 angles (front, back, right, left)
- Origin: Center of floor surface / Pedal side: −Y direction
この素材について
φ300・全高630mmのペダル式ゴミ箱です。フタとペダルが別々に動き、そのあいだを連動ロッドがつないでいます。下の4枚は、この素材に登録してあるアングルです。
動く部分
- フタ — 後ろのヒンジが支点。X軸まわりに回すと持ち上がります
- ペダル — 前の軸が支点。踏み込むと先が下がります
支点が別なので、踏み込みの途中でフタが半開きという状態も作れます。ペダルを踏み切った角度とフタを開き切った角度は連動していないので、絵に合う組み合わせを選んでください。
空洞に見えないようにしてあるところ
フタを開けたとき、胴がただの筒に見えないよう次を入れてあります。
- 口の内側のリング — 胴の上端に、黒いゴムの縁が一段入ります
- 内筒 — 胴の内側にもう一枚の面があり、口から覗いても底が抜けません
- 連動ロッド — ペダルの根元からフタのヒンジまで、1本の棒が胴の後ろに立ちます
アングル4件入り
正面・背面・右・左の4件を登録してあります。ツールプロパティ（サブツール詳細の「カメラ」→「アングル」）から選ぶと、上の画像と同じ構図になります。
LT変換
下はクリスタの実機でLT変換した主線です。
仕様
- 胴 φ300 × 全高 約630mm
- 部品：胴・フタ・ペダル（滑り止め付き）・連動ロッド・口の内側リング・内筒・ゴミ袋・ゴム脚4
- 可動部2か所（フタ＝後ろのヒンジ／ペダル＝前の軸）
- アングル4件（正面・背面・右・左）
- 原点：床面の中心／ペダル側：−Y方向
Material マテリアル
-
default material 初期マテリアル
Configuration 配置
-
default layout 初期レイアウト
Angle アングル
-
Front 正面
-
The backside 背面
-
Right 右
-
Left 左
Old version
Other materials by Didymoi.A
Popular “3D object” materials
New materials
-
MVP ◆This user has contributed greatly to the management of the community, by posting many great responses to the questions asked. Once every three months, MVPs are determined based on the points earned during that period and will be recognized accordingly. -
New Valuable Player (NVP) ◆These are the next-best contributors to the community after MVPs. This is awarded to users who have not yet won an MVP award, based on the number of points they have earned. -
Official Expert ◆Chosen out of all MVP awardees, who are already proof of excellence, this is a testimony of outstanding correspondence in the community. After careful screening, they are appointed by CELSYS and assume their position.Note: Formally called “Evangelists” -
Official Moderator of CELSYS ◆Moderators are official CELSYS staff members who are fluent in Japanese as well as various other languages. Moderators are not experts on the software or illustration, so they are not able to directly answer your questions. However, moderators provide communication and language support to ensure that everyone can smoothly communicate with each other. -
CELSYS official accountThe Official Administrator Account