Fan without blades (tower type / height 1075mm) (羽根なし扇風機(タワー型/高さ1075mm)) 羽根なし扇風機(タワー型/高さ1075mm)

Content ID:2299791

  • 469
  • Free
This material can be used in Studio Mode. (What is Studio Mode?)

It is a tower-type fan without blades. The height is 1075 mm, the diameter of the cylindrical part is 218 mm, and the blowing ring is 252 mm wide × 708 mm high. Below is a cylinder with perforated panels, and fine round holes are textured. Above it is a metallized neck, with a small viewing window and a power button. The blower ring is a racetrack shape with an elliptical cross-section. Only the inner edge is made metallic so that the surface where the wind comes out looks tight just like the real thing. The metal parts of the pedestal and neck are shaped like ring-shaped highlights. Since the main body, perforated panel, and air blower ring are object separately, you can use them differently, such as changing the color of only the ring. Living room corner, bedroom, office. It is a small item that determines the season and age just by placing it. 羽根のないタワー型の扇風機です。高さ1075mm、円筒部の直径218mm、送風リングは幅252×高さ708mmです。下は穴あきパネルの円筒で、細かい丸穴をテクスチャで作ってあります。その上に金属色の首があり、小さな表示窓と電源ボタンが付いています。送風リングは断面が楕円のレーストラック形。内側の縁だけ金属色にして、実物と同じく風の出る面が締まって見えるようにしました。台座と首の金属パーツはリング状のハイライトが出る形にしてあります。本体・穴あきパネル・送風リングは別オブジェクトなので、リングだけ色を変えるといった使い分けもできます。リビングの隅、寝室、オフィス。置いてあるだけで季節と年代が決まる小物です。

About this material

It is a tower type fan without blades. There are no moving parts.

Best practices

Place it in the corner of the room — 1,075mm high, so it's a little higher than the armrest of the sofa.

When lining up with a person, use chest height from the waist as a guide.

Missing ring — The center is clear, so you can see through the background on the far side.

Even if you place it in front of you, it will not block the screen.

Bring out the seasons — leave them out in the summer room and in the corner in the winter. of the same room

It can be used to draw separately.

Recording Angle

From the "angle" of the tool property, you can select four directions: front, back, right, and left .

It stops directly in front of and beside it, not from an angle, so when measuring dimensions,

You can use it as it is when you take the atari of the frame.

Tips for LT conversion

Perforated panels have fine dots, so if you make them into lines as they are, they will be crushed black.

The cylinder is placed as a surface in a light tone, with only the outline of the ring and the metal part of the neck

If you leave it with a dark line, you will get a clean feeling like a product.

Specifications

  • Height 1,075mm / Cylindrical part diameter 218mm / Pedestal diameter 240mm
  • Blower ring Width 252 × Height 708mm (Oval with cross-section 58 × 104mm)
  • Perforated panel: textured round hole (fan_mesh.png included)
  • Origin: Center of the ground plane / Front: −Y direction (side with operation panel)
  • Angles: Front, back, right, left Includes 4 types

この素材について

羽根なしのタワー型扇風機です。可動部はありません。

おすすめの使い方

部屋の隅に置く — 高さ1,075mmなので、ソファの肘掛けより少し高い程度です。

人物と並べるときは腰から胸の高さを目安にしてください。

リングの抜け — 中央が空いているので、向こう側の背景が透けます。

手前に置いても画面を塞ぎません。

季節を出す — 夏の部屋には出しっぱなし、冬は隅に寄せて。同じ部屋の

描き分けに使えます。

収録アングル

ツールプロパティの「アングル」から、正面 / 背面 / 右 / 左 の4方向を選べます。

斜めからではなく真正面・真横で止まるので、寸法を測るときや、

コマのアタリを取るときにそのまま使えます。

LT変換のコツ

穴あきパネルは点が細かいので、そのまま線にすると黒く潰れます。

円筒は薄いトーンで面として置き、リングの輪郭と首の金属部だけ

濃い線で残すと、製品らしい清潔感が出ます。

仕様

  • 全高 1,075mm/円筒部 直径218mm/台座 直径240mm
  • 送風リング 幅252 × 高さ708mm(断面 58 × 104mmの楕円)
  • 穴あきパネル:丸穴のテクスチャ付き(fan_mesh.png を同梱)
  • 原点:接地面の中心/正面:−Y方向(操作パネルのある側)
  • アングル:正面・背面・右・左の4種を収録

Material マテリアル

  • default material 初期マテリアル

Configuration 配置

  • default layout 初期レイアウト

Angle アングル

  • Front 正面
  • The backside 背面
  • Right
  • Left

Content ID:2299791

Published : 15 hours ago

Last updated : 15 hours ago

Didymoi.A's profile Go to profile

興味をもっていただきありがとうございます! 私は漫画家をやっています。漫画で利用する素材などをBlenderを使って作成しています。たくさんアップしますのでフォローお願いします。Xでも制作過程を乗せていますのでフォローやいいねなど反応していただけると嬉しいです。また仲良くしていた方限定で制作要望を承る場合がありますのでダイレクトメッセージください。

Other materials by Didymoi.A

Popular “3D object” materials

New materials