Slide (deck height 600mm) (滑り台(デッキ高600mm)) 滑り台(デッキ高600mm)

Content ID:2297417

  • 384
You can use this material with Clip Studio Paint Ver.2.2.0 and newer. ( Download Clip Studio Paint Ver.2.2.0 )
This material can be used in Studio Mode. (What is Studio Mode?)

It is a slide placed in the yard of a nursery school or in a park. The deck height is 600 mm and the total length is about 4.4 m. It consists of wooden posts and deck boards combined with resin green panels and dark brown steel pipe handrails. The gliding surface is curved and the tip lies horizontally, with rounded edges on both sides. The deck was surrounded by a vertical lattice of wood and resin, and the top edges were all rounded. The staircase has 3 steps, 200 mm risers and 300 mm treads, with corrugated panels and easy-to-grip handrails on both sides. Even the cap of the bolt is inserted, so the density is maintained even if it is cut closer. 保育園の園庭や公園に置かれる滑り台です。デッキ高さ600mm、全長約4.4mの幼児向けサイズ。木のポストとデッキ板に、樹脂の緑パネルと焦茶の鋼管手すりを組み合わせた構成です。滑走面はカーブして先端が水平に寝る形で、両側は丸く巻いた縁になっています。デッキのまわりは木と樹脂の縦格子で囲い、上端はすべて丸めました。階段は3段、蹴上200mm・踏面300mmで、両側に波形のパネルと握りやすい手すりが付きます。ボルトのキャップまで入れてあるので、寄りのカットでも密度が保ちます。

About this material

This is a complex playground equipment for infants with a deck height of 600 mm. There are no moving parts.

Best practices

Place it in the garden — Since the origin is the contact surface, just place it on the ground and it will fit.

Sliding scene — The slope of the gliding surface is approximately 35 degrees at the top and nearly horizontal at the tip.

Please use it as a guide when placing a person.

Aori — When you look up from below deck, the overlapping pillars and diagonals add depth.

Tips for LT conversion

The vertical lattice and the holes in the panel will be the main lines. The edges of the panel have a thick double line, so

If you make the line width narrower, the density will not increase too much.

Specifications

  • Length approx. 4,400 × Width approx. 1,600 × Height 1,450mm / Deck 1,100 × 1,100mm, Height 600mm
  • Gliding surface: Width 620mm (curve + horizontal running) / 3 steps (kick 200, tread 300mm)
  • Parts: 4 pillars, deck board, slide, staircase, 4 green panels, vertical lattice, 2 handrails, bolt caps
  • Origin: Ground patch center / slide exit: −Y direction

この素材について

デッキ高さ600mmの幼児用複合遊具です。可動部はありません。

おすすめの使い方

園庭に置く — 原点が接地面なので、地面に置くだけで収まります。

滑っている場面 — 滑走面の傾きは上端で約35度、先端はほぼ水平です。

人物を乗せるときの目安にしてください。

アオリ — デッキ下から見上げると、柱と斜材の重なりで奥行きが出ます。

LT変換のコツ

縦格子とパネルの穴が主な線になります。パネルの縁は厚みぶんの二重線が出るので、

線幅を細めにすると密度が上がりすぎません。

仕様

  • 全長 約4,400 × 幅約1,600 × 高さ1,450mm/デッキ 1,100 × 1,100mm・高さ600mm
  • 滑走面 幅620mm(カーブ+水平な走り出し)/階段3段(蹴上200・踏面300mm)
  • 部品:柱4本・デッキ板・滑り台・階段・緑パネル4枚・縦格子・手すり2本・ボルトキャップ
  • 原点:接地面の中心/滑り台の出口:−Y方向

Material マテリアル

Content ID:2297417

Published : 2 months ago

Last updated : 1 month ago

Didymoi.A's profile Go to profile

興味をもっていただきありがとうございます! 私は漫画家をやっています。漫画で利用する素材などをBlenderを使って作成しています。たくさんアップしますのでフォローお願いします。Xでも制作過程を乗せていますのでフォローやいいねなど反応していただけると嬉しいです。また仲良くしていた方限定で制作要望を承る場合がありますのでダイレクトメッセージください。