Triangular climbing playground equipment (bouldering surface + log climbing pier) (三角のクライミング遊具(ボルダリング面+丸太の登り桟)) 三角のクライミング遊具(ボルダリング面+丸太の登り桟)
Content ID:2298337
-
117
It is a triangular mountain-shaped climbing playground equipment made of logs. Width 2.4m, height 1.5m. The front is a planked bouldering surface with 27 holds in seven colors. The back side is a climbing pier with thin logs passed at equal intervals, and you can go up and down with your legs crossed. No matter which way you climb from, you can go to the other side at the top, which is a standard shape of the garden. At the top, I passed a log to grab it, and on the front side, I added a slightly lowered grip log. Since the boards are stretched one by one, the lines of the joints can be picked up as they are by LT conversion. The logs are chamfered with wooden openings, and the diagonals and bases are all connected. Since the board surface, hold, log pier, and framework are object separate, you can use it differently, such as erasing only the hold and making it a bare plank. The origin is the center of the contact patch, and the bouldering surface is oriented towards −Y. 丸太で組んだ三角の山型クライミング遊具です。幅2.4m、高さ1.5m。正面は板を張ったボルダリング面で、7色のホールドが27個付いています。裏面は細い丸太を等間隔に渡した登り桟で、こちらは足を掛けて上り下りします。どちらから登っても頂上でもう片方へ抜けられる、園庭の定番の形です。頂点には掴まるための丸太を通し、手前側には少し下げた握り丸太を足しました。板は1枚ずつ張ってあるので、目地の線がLT変換でそのまま拾えます。丸太は木口を面取りし、斜材と土台も全部つないであります。板面・ホールド・丸太の桟・骨組みは別オブジェクトなので、ホールドだけ消して素の板張りにする、といった使い分けもできます。原点は接地面の中心、ボルダリング面は−Y向きです。
About this material
It is a triangular playground equipment with bouldering on one side and a log fence on one side. There are no moving parts.
Four angles are registered: front, back, right, and left.
Select from the tool property angles to switch to that orientation.
object configuration
Name / Content
board_face / Planking in front (7 sheets)
Holds / 27 colorful holds
log_face / Thin log pier and diagonal timber on the back
frame / ridge log, edge diagonal, grounding base
Best practices
On the way up — the slope is about 54 degrees. The posture of sticking out the limbs is determined naturally.
Take a breath at the top — the ridge log is 1,500 mm from the ground. Face the picture of sitting astride each other.
Climb from the back — the log pier has 8 steps, spaced about 230 mm. Even small children can reach their feet.

Tips for LT conversion
The joints and holds of the planks will be the main information. Hold changes the tone for each color.
Even in monochrome, the colorfulness remains. For logs, only a contour line is enough.
Specifications
- Width 2,400 × Depth 2,200 × Height 1,500mm / Slope angle approx. 54 degrees
- Bouldering surface: 7 boards, 27 holds (7 colors)
- Log pier: φ70 in 8 steps (spacing approx. 230mm)
- Frame: ridge log φ150, diagonal material φ130, base φ130
- Origin: Center of contact patch / Bouldering surface: −Y orientation
- Format: OBJ + MTL
この素材について
片面がボルダリング、片面が丸太の桟になった三角の遊具です。可動部はありません。
正面・背面・右・左の4アングルを登録してあります。
ツールプロパティのアングルから選ぶと、その向きに切り替わります。
オブジェクトの構成
名前 / 内容
board_face / 正面の板張り(7枚)
holds / カラフルなホールド27個
log_face / 裏面の細い丸太の桟と斜材
frame / 稜の丸太・端の斜材・接地する土台
おすすめの使い方
登っている途中 — 斜面は約54度です。手足を突っ張る姿勢が自然に決まります。
頂上でひと息 — 稜の丸太は地面から1,500mm。またいで座る絵に向きます。
裏から登る — 丸太の桟は8段、間隔は約230mmです。小さい子でも足が届きます。

LT変換のコツ
板の目地とホールドが主な情報になります。ホールドは色ごとにトーンを変えると、
モノクロでもカラフルさが残ります。丸太は輪郭線だけで十分です。
仕様
- 幅2,400 × 奥行2,200 × 高さ1,500mm/斜面の角度 約54度
- ボルダリング面:板7枚張り・ホールド27個(7色)
- 丸太の桟:φ70を8段(間隔 約230mm)
- 骨組み:稜の丸太φ150・斜材φ130・土台φ130
- 原点:接地面の中心/ボルダリング面:−Y向き
- 形式:OBJ + MTL
Material マテリアル
-
default material 初期マテリアル
Configuration 配置
-
default layout 初期レイアウト
Angle アングル
-
Front 正面
-
The backside 背面
-
Right 右
-
Left 左