Refrigerator (500L class / movable door and drawer) (冷蔵庫(観音開き・500Lクラス/扉と引き出しが可動)) 冷蔵庫(観音開き・500Lクラス/扉と引き出しが可動)

Content ID:2296448

  • 1
You can use this material with Clip Studio Paint Ver.2.2.0 and newer. ( Download Clip Studio Paint Ver.2.2.0 )
This material can be used in Studio Mode. (What is Studio Mode?)

It is a refrigerator that opens for home use. 500L class with a width of 700 × depth of 700 × a height of 1830 mm.
The two doors of the refrigerator compartment and the three drawers of the freezer compartment and vegetable compartment move independently.
The outer edges of the door are fulcrums on the left and right, so you can open only one of the plays.
The drawer has a fulcrum in the center of the front, and when you pull it out to the front, a step appears.
The inside of the cabinet has three shelves and even a door pocket, so even if you cut it open, it will not be hollow.
The surface of the door is set to leave a slight reflection, giving it the texture of white goods with a sense of life.
The origin is the center of the floor surface, and the front is in the −Y direction.
It is the protagonist of the kitchen and also a prop that, when opened in the middle of the night, leaks light.
In the open file, I also included the door and drawer open.
家庭用の観音開き冷蔵庫です。幅700×奥行700×高さ1830mmの500Lクラス。
冷蔵室の扉2枚と、冷凍室・野菜室の引き出し3段が、それぞれ独立して動きます。
扉は左右の外端が支点なので、片方だけ開けた芝居ができます。
引き出しは前面中央に支点があり、手前へ引き出すと段が現れます。
庫内は棚板3枚とドアポケットまで作ってあるので、開けたカットでも空洞になりません。
扉の表面はわずかに反射を残した設定にしてあり、生活感のある白物家電の質感になります。
原点は床面の中心、前面は−Y方向です。
台所の主役であり、夜中に開けると光が漏れる小道具でもあります。
open ファイルでは扉と引き出しを開いた状態も同梱しました。

## About this material
It is a refrigerator with an open door. Two doors and three drawers move independently.

## How to use the gimmick
**Doors** — Select 'door_L' 'door_R' in the FBX version to open each outer edge to a fulcrum.
**Drawer** — 'drawer_0' to 'drawer_2' is the front center fulcrum. − You can pull it out by moving it in the Y direction.

## Best practices
**Only one door can be opened** — You can see the light and shelves inside, and you can tell the time of day.
**Only one drawer** — The low viewpoint with the freezer compartment open is directed towards the child's cut.
**Closes to Wall** — 700mm deep, so it fits alongside the kitchen.



## Specifications
- 700 × 700 × 1,830mm / Cold room (2 doors) + 3 drawers
- Inside: 3 shelves, 4 door pockets
- Origin: Center / Front of Floor: −Y direction
- Format: FBX (with fulcrum) + OBJ + MTL

## Image


## この素材について
観音開きの冷蔵庫です。扉2枚と引き出し3段が独立して動きます。

## ギミックの使い方
**扉** — FBX版で `door_L` `door_R` を選ぶと、それぞれの外端を支点に開きます。
**引き出し** — `drawer_0` 〜 `drawer_2` は前面中央が支点です。−Y方向へ動かすと引き出せます。

## おすすめの使い方
**片扉だけ開ける** — 中の光と棚が見えて、生活の時間帯が伝わります。
**引き出しを1段だけ** — 冷凍室を開けた低い視点は、子どものカットに向きます。
**壁に寄せる** — 奥行700mmなので、キッチンの並びにそのまま収まります。



## 仕様
- 700 × 700 × 1,830mm/冷蔵室(観音扉2枚)+引き出し3段
- 庫内:棚板3枚、ドアポケット4個
- 原点:床面の中心/前面:−Y方向
- 形式:FBX(支点あり)+ OBJ + MTL

## 画像


Material マテリアル

Content ID:2296448

Published : 3 hours ago

Last updated : 3 hours ago

gemini.A's profile Go to profile

興味をもっていただきありがとうございます! 私は漫画家をやっています。漫画で利用する素材などをBlenderを使って作成しています。たくさんアップしますのでフォローお願いします。あと要望ありましたら検討しますのでダイレクトメッセージください。

Other materials by gemini.A

Popular “3D object” materials

New materials