Domestic trampoline with handrails (家庭用トランポリン(手すり付き)) 家庭用トランポリン(手すり付き)

Content ID:2311058

  • 1,034
  • Free
This material can be used in Studio Mode. (What is Studio Mode?)

It is a folding trampoline for home use. It has a diameter of 1,020 mm and a jumping surface height of 250 mm. It has a black frame, a red spring cover, and a U-shaped handrail. The handrail is 900mm high from the jumping surface, with a black grip wrapped around the grip. The legs are six U-shaped folding legs. In the grounding part I put a rubber cap. The spring cover is a round and thick pad with an outer diameter of 1,020 mm and an inner diameter of 700 mm. Since the frame, pad, jumping surface, and handrail are object separate, you can erase only the handrail and make it a trampoline with only the jumping surface. The origin is the center of the contact plane, and the front is in the −Y direction. Includes 4 angles: front, back, right, and left. 家庭用の折りたたみトランポリンです。直径1,020mm、跳ぶ面の高さは250mm。黒いフレームに赤いスプリングカバー、U字の手すりが立った形です。手すりは跳ぶ面から900mmの高さで、握るところに黒いグリップを巻きました。脚はU字の折りたたみ脚が6本。接地部にはゴムのキャップを入れました。スプリングカバーは断面の丸い分厚いパッドで、外径1,020mm・内径700mm。フレーム・パッド・跳ぶ面・手すりは別オブジェクトなので、手すりだけ消して跳ぶ面だけのトランポリンにもできます。原点は接地面の中心、正面は−Y方向。正面・背面・右・左の4アングル入り。

About this material

It is a household mini trampoline with a diameter of 1,020 mm. With handrails.

Handrails can be removed.

Frames, pads, jumping surfaces, and handrails are object separately. If you erase the handrail, it becomes a round trampoline with only a jumping surface.

There is a black grip where it grips, and a height adjustment knob on the post.

Legs and pads

  • Legs — 6 U-shaped folding legs. A rubber cap enters the grounding area.
  • Spring Cover — Thick padding with a round cross-section. Outer diameter 1,020 mm and inner diameter 700 mm. A rim line appears on the border with the jumping surface.

4 angles

Four items are registered: front, back, right, and left.

LT Conversion

Below is the main line converted to LT with the actual CLIP STUDIO machine.

Specifications

  • Diameter 1,020mm / Jumping surface height 250mm / Height approx. 1,150mm
  • Spring cover Outer diameter 1,020 × Inner diameter 700mm / Jumping surface diameter 720mm
  • Handrail width 620mm, 900mm from the jumping surface (with grip, adjustment knob, separate object)
  • Legs: 6 U-shaped folding legs with rubber cap
  • 4 angles (front, back, right, left)
  • Origin: Center of contact patch / Handrail: Back (+Y) side / Front: −Y direction

この素材について

直径1,020mmの家庭用ミニトランポリンです。手すり付き。

手すりは外せます

フレーム・パッド・跳ぶ面・手すりはそれぞれ別オブジェクトです。手すりを消せば、跳ぶ面だけの丸いトランポリンになります。

握るところには黒いグリップ、支柱には高さ調整のつまみが付きます。

脚とパッド

  • 脚 — U字の折りたたみ脚が6本。接地部にゴムのキャップが入ります
  • スプリングカバー — 断面の丸い分厚いパッド。外径1,020mm・内径700mm。跳ぶ面との境に縁の線が出ます

アングル4件入り

正面・背面・右・左の4件を登録してあります。

LT変換

下はクリスタの実機でLT変換した主線です。

仕様

  • 直径1,020mm/跳ぶ面の高さ250mm/全高 約1,150mm
  • スプリングカバー 外径1,020 × 内径700mm/跳ぶ面 直径720mm
  • 手すり 幅620mm・跳ぶ面から900mm(グリップ・調整つまみ付き・別オブジェクト)
  • 脚:U字の折りたたみ脚6本・ゴムキャップ付き
  • アングル4件(正面・背面・右・左)
  • 原点:接地面の中心/手すり:奥(+Y)側/正面:−Y方向

Material マテリアル

  • default material 初期マテリアル

Configuration 配置

  • default layout 初期レイアウト

Angle アングル

  • Front 正面
  • The backside 背面
  • Right 右
  • Left 左

Update history

2026/10/4 Material review (improvement of accuracy, addition of materials, clarification of contour lines), registration of angles 2026/10/4 素材見直し(正確性向上、マテリアル追加、輪郭線の明確化)、アングルの登録

Old version

Content ID:2311058

Published : 2 hours ago

Last updated : 2 hours ago

Didymoi.A's profile Go to profile

興味をもっていただきありがとうございます! 私は漫画家をやっています。漫画で利用する素材などをBlenderを使って作成しています。たくさんアップしますのでフォローお願いします。Xでも制作過程を乗せていますのでフォローやいいねなど反応していただけると嬉しいです。また仲良くしていた方限定で制作要望を承る場合がありますのでダイレクトメッセージください。