Children's high chair (wooden, seat height adjustable) (子供用ハイチェア（木製・座面高さ調整式）) 子供用ハイチェア（木製・座面高さ調整式）
Content ID：2300801
-
175
It is a Scandinavian wooden high chair with a seat board inserted into an oblique pillar. Width 460× depth 780× height 800mm. The pillars are 70 degrees to the floor, and they are poised to fall backwards. There are 9 height-adjustable grooves on the inside of the pillars. The seat board and footrest insert both ends into the groove and fit snugly between the posts. The tiers can be changed as the child grows. The backrest is also between the pillars. I made a dent in the center to receive the back. With legs stretched out on the floor and a post that falls backwards, it is poised to fall even if you put your weight on it forward. In front is through a black metal rod. The seat board, footrest, backrest, and frame are object separately. The seat board and the lowered footrest are also included in a separate file, so you can draw different ones for babies and toddlers. Please enjoy it next to the dining table. 斜めの支柱に座板を差し込む、北欧型の木製ハイチェアです。幅460×奥行780×高さ800mm。支柱は床と70度で、後ろへ倒れた構えです。支柱の内側には高さ調整の溝が9段。座板と足置き板はその溝に両端を差し込む形で、支柱のあいだにぴたりと収まります。段は子どもの成長に合わせて変えられます。背もたれも同じく支柱のあいだ。中央をへこませて背中を受ける形にしました。床に伸びた脚と後ろへ倒れた支柱で、前に体重をかけても倒れない構えです。前には黒い金属のロッドを通してあります。座板・足置き板・背もたれ・枠はそれぞれ別オブジェクトです。座板と足置きを下げた状態も別ファイルで同梱したので、赤ちゃん用と幼児用を描き分けられます。ダイニングテーブルの横にどうぞ。
About this material
It is a height-adjustable wooden high chair. The seat board and footrest can be raised and lowered along the groove.
How to use the gimmick
Seat height — Moving the seat and footrest in the Z direction changes the tier.
The groove has a pitch of 35mm, so if you move it in multiples of that, it fits perfectly into the groove.
Since the support is falling back, when lowering it, shift it slightly forward (−Y) to fit the groove.
object configuration
Name / Content
frame / 2 sets of side frames (posts, floor legs), metal rod, screw cap
Seat / Seat board
Footrest
backrest / 2 backrests
Included Files
- high_chair.obj — Seat 460mm (baby to infant)
- high_chair_low.obj — seat 320 mm (lowered for larger children)
Best practices
Horizontal dining table – 460 mm seat fits the height of the dining table.
Empty chair — A highchair with no one sitting makes you feel like it's time for life.
Baby food scenes — When you put a tray or dish on it, it becomes a meal frame.
Recording Angle
From the "angle" of the tool property, you can select four directions: front, back, right, and left .
The front is the side facing the seater (the side where the seat board extends). When viewed from the side, the tilt of the pillars and
The groove tiers are the best to read.
Tips for LT conversion
The groove of the support is the most distinctive feature of this chair. Make the line width narrower
If you leave only the shadow of the steps, it will look like a product without giving it the texture of wood.
Specifications
- Width 460 × Depth 780 × Height 800mm / Seat 460mm (_low is 320mm)
- Pillar: 70 degrees angle to the floor / groove 9 steps on the inner surface, 35 mm pitch, horizontal with the ground, penetrates the find
- Seat plate 424 × 215mm / Footrest 424 × 320mm (both are sandwiched between posts)
- 2 backrests (26mm dented in the center)
- With front metal rod screw cap
- Origin: Center of the contact patch / Front: −Y direction (side where the seat plate extends)
- Angles: Front, back, right, left Includes 4 types
この素材について
高さ調整式の木製ハイチェアです。座板と足置き板は溝に沿って上下可能です。
ギミックの使い方
座面の高さ — seat と footrest をZ方向に動かすと段が変わります。
溝は35mmピッチなので、その倍数で動かすと溝にぴたりと収まります。
支柱が後ろへ倒れているぶん、下げるときは少し前（−Y）へずらすと溝に合います。
オブジェクトの構成
名前 ／ 内容
frame ／ 側枠2組（支柱・床の脚）・金属ロッド・ネジのキャップ
seat ／ 座板
footrest ／ 足置き板
backrest ／ 背もたれ2枚
同梱ファイル
- high_chair.obj — 座面460mm（赤ちゃん〜幼児）
- high_chair_low.obj — 座面320mm（大きい子ども向けに下げた状態）
おすすめの使い方
食卓の横 — 座面460mmはダイニングテーブルの高さに合います。
空の椅子 — 誰も座っていないハイチェアは、生活の時間を感じさせます。
離乳食の場面 — トレイや食器を載せると、そのまま食事のコマになります。
収録アングル
ツールプロパティの「アングル」から、正面 / 背面 / 右 / 左 の4方向を選べます。
正面は座る人が向く側（座板が伸びる側）です。真横から見ると、支柱の傾きと
溝の段が一番よく読めます。
LT変換のコツ
支柱の溝はこの椅子のいちばんの特徴です。線幅を細めにして
段の影だけ残すと、木の質感を出さなくても製品らしく見えます。
仕様
- 幅460 × 奥行780 × 高さ800mm／座面 460mm（_low は320mm）
- 支柱：床との角度70度／溝は内側の面に9段・35mmピッチ・地面と水平・見付けを貫通
- 座板 424 × 215mm／足置き板 424 × 320mm（どちらも支柱のあいだに挟まる）
- 背もたれ 2枚（中央が26mmへこむ）
- 前の金属ロッド・ネジのキャップ付き
- 原点：接地面の中心／正面：−Y方向（座板が伸びる側）
- アングル：正面・背面・右・左の4種を収録
Material マテリアル
-
default material 初期マテリアル
Configuration 配置
-
default layout 初期レイアウト
Angle アングル
-
Front 正面
-
The backside 背面
-
Right 右
-
Left 左
Other materials by Didymoi.A
Popular “3D object” materials
New materials
-
MVP ◆This user has contributed greatly to the management of the community, by posting many great responses to the questions asked. Once every three months, MVPs are determined based on the points earned during that period and will be recognized accordingly. -
New Valuable Player (NVP) ◆These are the next-best contributors to the community after MVPs. This is awarded to users who have not yet won an MVP award, based on the number of points they have earned. -
Official Expert ◆Chosen out of all MVP awardees, who are already proof of excellence, this is a testimony of outstanding correspondence in the community. After careful screening, they are appointed by CELSYS and assume their position.Note: Formally called “Evangelists” -
Official Moderator of CELSYS ◆Moderators are official CELSYS staff members who are fluent in Japanese as well as various other languages. Moderators are not experts on the software or illustration, so they are not able to directly answer your questions. However, moderators provide communication and language support to ensure that everyone can smoothly communicate with each other. -
CELSYS official accountThe Official Administrator Account