ver. 1.4.1 to drop. ver. 1.4.1以降。
A group of brushes for monochrome layers.
That's it.
# Pseudo Gradation
Dedicated to monochrome layers .
Alpha value Layer species (gray, quick mask, layer mask: gradation, selection, etc.) do not administrations. If it is a monochrome layer, raster vectors are alike.
If this brush is a person who understands CLIP STUDIO normally, the existence itself is meaningless . (Because I only have to toning a gray or a color layer and draw it with a standard brush...) I don't allow anything other than the binary layer. I want a brush like oddities... For people like.
5, 7, 9, 11 is the size of the texture used in the paper is different because the stroke is superimposed
Moire. If you want to adjust the intensity of one stroke, change the texture density.
If it is lowers, it thickens and it is thin. Pressure dependent.
If you want to adjust the "brush density" pressure curve more.
"Hardness" If you adjust the contour.
─ ─ ─ ─ ─ ─ ─
# Sandy Eyes
The face of the sand is put on the tone... Like when. W
It disappears neatly because the particle size becomes small because the stroke interval spreads and the brush is cut. So it should be easy to use in a sense.
Brush size to paint the area. To increase the concentration, the particle density. The size of the grains should be changed particle size each time.
The tool property only shows three of them, so there is no cumbersome.
─ ─ ─ ─ ─ ─ ─
# Splash
It changes to the from ellipse by the brush speed. As well as the "sand Eyes" above, this will spread the spacing between the points of the brush and reduce the particle size. Since you are not using the image brush tip, it is light quick and useful.
Because the scatter brush and the brush size are "specify by size on screen", the content that is drawn edifies the scale of the canvas changes.
This brush can also be used in color.
─ ─ ─ ─ ─ ─ ─
# Cross-hatching
Put pressure and pull it out.
The more pressure you use, the more you scatter, and the less you break.
Similarly, if you multiply the drawing point interval, it is wide, if you miss.
The size of the cross-hatching is particle size.
─ ─ ─ ─ ─ ─ ─
Diagonal
It was a diagonal brush or something to give a paper.
Just use the material that is in the standard is enough for the most.
Just use the material that is in the standard is enough for the most.
... It is based on the spirit of
─ ─ ─ ─ ─ ─ ─
# 17 ° Cross
Exclusive cross. For people who need to sharpen and earn information density.
Cut the line from 0, 90 ∠ ± 17 °. I feel like changing the angle of the Amity point, the canvas is not a rotation angle other than 0-90-180-270.
─ ─ ─ ─ ─ ─ ─
# Ink
"Stop, Splash, brushed" is too unreasonable....
If you have a Intuos pen (a guy with rotation detection), sub tool detail/brush tip "orientation" can be "rotation of pen axis". I don't have it, but W, maybe.
Because it is not good at all by this, remodeling is indispensable.
─ ─ ─ ─ ─ ─ ─
I made a video of what some of the above-mentioned sense of use.
http://youtu.be/nGfPLrQGrdc
─ ─ ─ ─ ─ ─ ─
# 2 Cacegrade
I made my foot.
モノクロレイヤー用のブラシ群です。
━━━━━━━━
＃擬似階調
モノクロレイヤー専用。
アルファ値を持つレイヤー種（グレー・カラー・クイックマスク・レイヤーマスク：階調あり・選択範囲等）では用を為しません。モノクロレイヤーであればラスター・ベクターは問わず。
このブラシはクリスタを普通に理解している人の場合、存在自体が意味不明です。（だってグレーかカラーレイヤーをトーン化して標準的なブラシで描けばいいだけだから…）二値レイヤー以外は許さないよ。とか変わり種のブラシがほしいんじゃ…みたいな人向け。
5,7,9,11は紙質に使っているテクスチャのサイズが違うので描線を重ねると
モアレます。１ストロークの“濃さ”を調整したい場合は、紙質濃度を変更。
下げれば濃く、上げれば薄く。筆圧依存。
もっと調整したい場合は“ブラシ濃度”の筆圧曲線を。
輪郭を調整するなら“硬さ”を。
────────
＃砂目
砂目のトーン貼って削るのめんどくせぇ…みたいな時に。ｗ
筆圧抜くと描点間隔が広がって粒子サイズが小さくなるので綺麗に消えていきます。なので感覚的に使いやすいはず。
広域を塗るにはブラシサイズを。濃度を上げるには粒子密度を。粒の大きさは粒子サイズをその都度変更してください。
ツールプロパティにはその３つしか表示していないので、煩わしくありません。
────────
＃しぶき
筆速で丸から楕円に変わります。これも前述の“砂目”同様、筆圧を抜くと描点間隔が広がって粒子サイズが小さくなります。ブラシ先端に画像を使用していないので、軽い速いで有用度高め。
散布ブラシで且つ、ブラシサイズが“画面上のサイズで指定”なので、キャンバスの表示倍率に因って描画される内容が変わります。
このブラシはカラーでも使えます。
────────
＃カケアミ
筆圧かけたり抜いたりで。
筆圧をかければ散布数が多く、抜けば少なくなります。
同様に描点間隔も、かければ密に、抜けば広く。
カケアミの大きさは“粒子サイズ”です。
────────
＃斜線
斜線ブラシだったかなんかに紙質を与えてみたモノ。
標準で入ってる素材を駆使するだけで大概の用は足りるんじゃん。
標準で入ってる素材を駆使するだけで大概の用は足りるんじゃん。
…という精神に基づいています。
────────
＃１７°クロス
アミ点専用クロス。削って情報密度を稼ぐ必要がある人向け。
0,90∠から±17°のラインを削ります。アミ点の角度を変えていたり、キャンバスが0-90-180-270以外の回転角だとイマイチになる気がするけど分かんね。
────────
＃墨
「とめ・はね・はらい」の「とめ」が無理過ぎる…。
インテュオスの高いペン（回転検知のあるやつ）ならサブツール詳細／ブラシ先端の“向き”を「ペン軸の回転」にすると出来るのかも。持ってないので分らないけどｗ、多分。
これじゃあ全然ダメなので、改造必須です。
────────
上記の幾つかをどんな使用感なのか動画にしてみました。
http://youtu.be/nGfPLrQGrdc
────────
＃２カケグラデ
足しました。
Brush ブラシ
Update history
[2015-06-11 22:00] 2 Cacegrade (brush) was added. 【2015-06-11 22:00】２カケグラデ（ブラシ）を追加しました。
Other materials by ﾏｯｼｭﾎﾟﾃﾄﾝﾒｪ
Popular “Material catalog” materials
New materials
Badges
-
MVP ◆This user has contributed greatly to the management of the community, by posting many great responses to the questions asked. Once every three months, MVPs are determined based on the points earned during that period and will be recognized accordingly. -
New Valuable Player (NVP) ◆These are the next-best contributors to the community after MVPs. This is awarded to users who have not yet won an MVP award, based on the number of points they have earned. -
Official Expert ◆Chosen out of all MVP awardees, who are already proof of excellence, this is a testimony of outstanding correspondence in the community. After careful screening, they are appointed by CELSYS and assume their position.Note: Formally called “Evangelists” -
Official Moderator of CELSYS ◆Moderators are official CELSYS staff members who are fluent in Japanese as well as various other languages. Moderators are not experts on the software or illustration, so they are not able to directly answer your questions. However, moderators provide communication and language support to ensure that everyone can smoothly communicate with each other. -
CELSYS official accountThe Official Administrator Account