Wooden deck bridge (log pillars and jade ornaments) (木製デッキ橋(丸太の柱・玉飾り)) 木製デッキ橋(丸太の柱・玉飾り)
Content ID:2310665
-
934
It is a small wooden deck bridge made of log pillars. The deck is 1,000×900 mm and the height of the top is 360 mm. A round jade hat rests on the head of the pillar, and a warped handrail crosses between the pillars. The kick is 120mm. The deck boards rest on girders chipped into the pillars, and the springboard is received from the ground with short logs. The deck is upholstered with planks, and joints are inserted one by one. The pillar is 130 mm in diameter and the ball is 170 mm in diameter. I also put the head of the bolt. The origin is the center of the contact patch, and the crossing direction is in the Y direction. Four angles are registered: front, back, right, and left. 丸太の柱で組んだ小さな木製のデッキ橋です。デッキは1,000×900mm、天端の高さ360mm。柱の頭には丸い玉の笠が載り、柱のあいだには反りのある手すりが渡ります。蹴上は120mm。デッキ板は柱に欠き込んだ桁に載り、踏み台は短い丸太で地面から受けています。デッキは板を並べた張りで、1枚ずつ目地が入ります。柱は直径130mm、玉は直径170mm。ボルトの頭も入れました。原点は接地面の中心、渡る向きはY方向です。正面・背面・右・左の4アングルを登録してあります。
About this material
It is a small wooden deck bridge with a deck of 1,000×900 mm and a top of 360 mm. From both sides rise with two steps.

Deck Plank
The boards are lined up one by one, so the joints come out as lines. It is not made of wood grain on a single surface. Whether you're composing from above or diagonally, you can tell the direction of the deck by the joints.
Pillars and railings
The pillars are six φ130 logs. A φ170 jade hat is placed on the head. Between the pillars are warped handrails, which are grouped together in a shape without corners. At the joint enters the head of the bolt.
4 angles
Four items are registered: front, back, right, and left.
LT Conversion
Below is the main line converted to LT with the actual CLIP STUDIO machine.

Specifications
- Deck 1,000 × 900mm・Top 360mm/Height 720mm
- 6 pillars (φ130, ball φ170 on the head) / warped handrails / 2 steps × 2 steps (120 mm on the kick)
- Assembling: Two girders chipped into the pillars receive deck boards / The steps are received by two short logs per board
- The deck board is upholstered one by one / the wooden mouth is made of tree ring material / the head of the bolt
- 4 angles (front, back, right, left)
- Origin: Center of the ground patch / Direction of crossing: Y direction
この素材について
デッキ1,000×900mm・天端360mmの小さな木製デッキ橋です。両側から2段の踏み台で上がります。

デッキの板
板を1枚ずつ並べた張りにしてあるので、目地が線として出ます。1枚の面に木目を貼ったものではありません。上からの構図でも、斜めからの構図でも、デッキの向きが目地で分かります。
柱と手すり
柱はφ130の丸太6本。頭にφ170の玉の笠が載ります。柱のあいだには反りのある手すりが渡り、角のない形にまとめてあります。つなぎ目にはボルトの頭が入ります。
アングル4件入り
正面・背面・右・左の4件を登録してあります。
LT変換
下はクリスタの実機でLT変換した主線です。

仕様
- デッキ 1,000 × 900mm・天端360mm/全高 720mm
- 柱6本(φ130・頭に玉φ170)/反りのある手すり/踏み台2段×2箇所(蹴上120mm)
- 組み方:柱に欠き込んだ桁2本がデッキ板を受ける/踏み台は板ごとに短い丸太2本で受ける
- デッキ板は1枚ずつの張り/木口は年輪マテリアル/ボルトの頭入り
- アングル4件(正面・背面・右・左)
- 原点:接地面の中心/渡る向き:Y方向
Material マテリアル
-
default material 初期マテリアル
Configuration 配置
-
default layout 初期レイアウト
Angle アングル
-
Front 正面
-
The backside 背面
-
Right 右
-
Left 左
Update history
2026/10/7 Material review (accuracy improvement, material addition, outline line clarification), angle registration
2026/10/7 素材見直し(正確性向上、マテリアル追加、輪郭線の明確化)、アングルの登録
Old version