It is a migratory playground equipment with six stumps of different heights arranged on a log frame. The total length is 2,200 mm. The top of the stump varies from 300 to 430 mm, so you can cross it while looking at your feet. Behind stands a handrail. The head of the mounting bolt is also inserted. The origin is the center of the contact patch, the crossing direction is in the X direction, and the handrail is on the +Y side. Four angles are registered: front, back, right, and left. 丸太の枠の上に、高さの違う切り株を6つ並べた渡り遊具です。全長2,200mm。切り株の天端は300〜430mmとばらつかせてあるので、足元を見ながら渡ります。後ろには手すりが立ちます。取り付けボルトの頭も入れてあります。原点は接地面の中心、渡る向きはX方向、手すりは+Y側です。正面・背面・右・左の4アングルを登録してあります。
About this material
It is a playground equipment with a total length of 2,200 mm and crosses six stumps. With handrails.
Stump height
The top edge is scattered between 300 and 430 mm. When viewed from the side, the top ends are not aligned in a straight line, so you have to move your legs up and down to cross. Under the stump, one log of the receiver passes through and rests on the frame of the log in front and on the railing side.
Railings
There are four pillars of dark brown steel pipes and two wooden rungs. The heights are 560 mm and 740 mm. It stands 470 mm behind the center of the stump, on the frame of the log on the railing side.
4 angles
Four items are registered: front, back, right, and left.
LT Conversion
Below is the main line converted to LT with the actual CLIP STUDIO machine.
Specifications
- Length 2,200 × Width approx. 900 × Height 780mm
- 6 stumps (top 300-430mm, wood mouth is tree ring material) / 6 receiving logs, 3 log frames
- 2 handrails (560・740mm) / 4 steel pipe pillars
- 4 angles (front, back, right, left)
- Origin: Ground patch center / Crossing direction: X direction / Handrail: +Y side
この素材について
全長2,200mm、切り株6本を渡る遊具です。手すり付き。
切り株の高さ
天端は300〜430mmのあいだでばらつかせてあります。横から見たとき天端が一直線に並ばないので、足を上げ下げして渡る動きになります。切り株の下には受けの丸太が1本ずつ通り、手前と手すり側の丸太の枠に載ります。
手すり
焦茶の鋼管の柱4本に、木の横木を2段渡してあります。高さは560mmと740mm。切り株の中心から470mm奥、手すり側の丸太の枠の上に立っています。
アングル4件入り
正面・背面・右・左の4件を登録してあります。
LT変換
下はクリスタの実機でLT変換した主線です。
仕様
- 全長 2,200 × 幅約900 × 高さ780mm
- 切り株6本（天端 300〜430mm・木口は年輪マテリアル）／受けの丸太6本・丸太の枠3本
- 手すり2段（560・740mm）／鋼管の柱4本
- アングル4件（正面・背面・右・左）
- 原点：接地面の中心／渡る向き：X方向／手すり：+Y側
Material マテリアル
-
default material 初期マテリアル
Configuration 配置
-
default layout 初期レイアウト
Angle アングル
-
Front 正面
-
The backside 背面
-
Right 右
-
Left 左
Update history
2026/10/7 Material review (accuracy improvement, material addition, outline line clarification), angle registration
2026/10/7 素材見直し（正確性向上、マテリアル追加、輪郭線の明確化）、アングルの登録
Old version
Other materials by Didymoi.A
Popular “3D object” materials
New materials
-
MVP ◆This user has contributed greatly to the management of the community, by posting many great responses to the questions asked. Once every three months, MVPs are determined based on the points earned during that period and will be recognized accordingly. -
New Valuable Player (NVP) ◆These are the next-best contributors to the community after MVPs. This is awarded to users who have not yet won an MVP award, based on the number of points they have earned. -
Official Expert ◆Chosen out of all MVP awardees, who are already proof of excellence, this is a testimony of outstanding correspondence in the community. After careful screening, they are appointed by CELSYS and assume their position.Note: Formally called “Evangelists” -
Official Moderator of CELSYS ◆Moderators are official CELSYS staff members who are fluent in Japanese as well as various other languages. Moderators are not experts on the software or illustration, so they are not able to directly answer your questions. However, moderators provide communication and language support to ensure that everyone can smoothly communicate with each other. -
CELSYS official accountThe Official Administrator Account