Log balance beam (for infants, tread height 420mm) (丸太の平均台(幼児用・踏面高420mm)) 丸太の平均台(幼児用・踏面高420mm)

Content ID:2296796

  • 164
  • Free
This material can be used in Studio Mode. (What is Studio Mode?)

It is a balance beam of logs placed in the garden. The length is 2,400 mm, and the height of the tread is about 420 mm. It is low enough for infants to ride across, and it has a simple configuration that is supported by log receivers at both ends. The log is 190 mm in diameter, and the receiver is a combination of a ground crossbar and a short standing tree. The wooden edges are all chamfered and rolled, so there are no corners to cut out. I also put the head of the mounting bolt. When you put several trees in the garden, you can mix the colors so that they do not become monotonous. The origin is the center of the contact patch, and the log extends in the X direction. The balance beam is a playground equipment with a clear purpose of "crossing", so it is an easy-to-handle prop when you want to give movement to a person. 園庭に置かれる丸太の平均台です。長さ2,400mm、踏面の高さは約420mm。幼児がまたいで乗れる低さで、両端を丸太の受けで支えた単純な構成です。丸太は直径190mm、受けは接地する横木と短い立ち木の組み合わせ。木口はすべて面取りして丸めてあるので、切りっぱなしの角が立ちません。取り付けボルトの頭も入れました。園庭に何本か置くとき、色を混ぜると単調になりません。原点は接地面の中心、丸太はX方向に伸びます。平均台は「渡る」という目的がはっきりした遊具なので、人物に動きを与えたいときに扱いやすい小道具です。

About this material

It is a balance beam with logs on two receivers. There are no moving parts.

Best practices

Arrange a few trees — Shake them slightly to create a garden-like clutter.

Mix colors — Alternating natural colors and reds creates a sense of unity that looks like a ready-made product.

Put it on — the tread is about 420 mm from the ground. Use it as a guide for foot positioning.

Specifications

  • Total length 2,400mm / Log φ190mm / Tread height approx. 420mm
  • Parts: Logs, receivers (crossbars + standing trees), × 2, bolts
  • Origin: Ground patch center / Log orientation: X direction
  • Format: OBJ + MTL

この素材について

丸太を2つの受けに載せた平均台です。可動部はありません。

おすすめの使い方

何本か並べる — 向きを少しずつ振って置くと、園庭らしい散らばりになります。

色を混ぜる — 自然色と赤を交互に置くと、既製品らしい統一感が出ます。

乗せる — 踏面は地面から約420mmです。足の位置決めの目安にしてください。

仕様

  • 全長 2,400mm/丸太 φ190mm/踏面高 約420mm
  • 部品:丸太・受け(横木+立ち木)×2・ボルト
  • 原点:接地面の中心/丸太の向き:X方向
  • 形式:OBJ + MTL

Material マテリアル

  • default material 初期マテリアル

Configuration 配置

  • default layout 初期レイアウト

Content ID:2296796

Published : 5 hours ago

Last updated : 5 hours ago

gemini.A's profile Go to profile

興味をもっていただきありがとうございます! 私は漫画家をやっています。漫画で利用する素材などをBlenderを使って作成しています。たくさんアップしますのでフォローお願いします。あと要望ありましたら検討しますのでダイレクトメッセージください。

Other materials by gemini.A

Popular “3D object” materials

New materials