5 types of antique wooden buckets
Each lid has two types of lids, and each lid has two types of handles.
アンティークな木製バケツ5種です
それぞれ蓋が2種・さらに各蓋に2種のハンドルがついています
HM wooden bucket (5 types)
Here are 5 types of wooden buckets like this that I made by studying Blender's geometry nodes.
Immediately after loading, it looks like above
However, this is a state where there are two lids, each with two types of handles, so the display is a little strange.
object composition and care
Depending on the type, it may have a metal handle or metal fittings.
For the time being, it is recommended to use the lid by hiding or deleting either 1 (flat) or 2 (uneven).
In addition, the lid comes with two handles (handle and knob), so if you don't use this either, hide or delete it.
If you don't need the edge of lid 1, you can erase it.
Change the angle of the hanging parts of the bucket such as ropes as appropriate.
(If you select a rope etc. from the object list, a gizmo centered on the hanging part should appear, so adjust it with that)
You can move the surface of the water downward if it's just a little (as long as it doesn't penetrate the outside of the bucket).
LT Conversion and Materials
LT conversion looks like this
The rope may be a little noisy, but let's lower the line detection value on the texture line drawing tab of the LT conversion screen.
A better method is to make the material "all white" and extract the line art.
Select the object and click the third icon from the right of the menu that appears to display the set material.
If you select all white, all textures will disappear.
This will prevent extra wood grain and rope textures from appearing in tones and lines by rendering.
There are also masks that are color-coded for each part, so please use them to adjust the color.
kind
The parts composition of each is roughly the same as the object list above, but unnecessary lids are hidden.
The number of liters is a rough guide
From left to right
8 liters A (lid 2 × handle), 8 liter B (lid 1 × knob) Consists of 8 plates
8 liters A (lid 2 × handle), 8 liter B (lid 1 × knob) Consists of 8 plates
(Body dimensions: diameter 28.3cm, height 27.2cm, composed of 8 boards)
13 litre tapered (2 types of lids staggered)
(Body dimensions: diameter 34.8cm, height 38cm, composed of 8 boards)
22 liter A (lid 1 × knob), 22 liter B (lid 2 × handle)
(Body dimensions: diameter 43.6cm, height 36.7cm, composed of 10 boards)
hm木製バケツ（5種）
Blenderのジオメトリ―ノードの勉強がてら作ったこのような木製バケツの5種つめあわせです
読み込んだ直後では上のような感じです
しかしこれは蓋が2枚、それぞれに2種ハンドルがついている状態なのでちょっと表示が変なことになっています
オブジェクト構成と注意
種類によってはメタルハンドルだったり金具がついたりもします
とりあえず蓋に関しては１（平ら）か２（凹凸）のどちらかを非表示か削除なりしての使用を推奨です
さらに蓋には２つの取っ手（ハンドルとつまみ）が付属していますので、これも使わない方は非表示か削除してください
たが・蓋１のふちも不必要なら消しちゃってよしです
ロープなどバケツの吊り下げパーツは適宜角度を変えるなどしましょう
（オブジェクトリストからロープ等を選択すると吊り下げ部を中心にしたギズモが現れるはずですのでそれで調整します）
水面はちょっとだけなら下方向に動かして大丈夫です（バケツの外に突き抜けてこない限りは）
LT変換とマテリアル
LT変換したらこんな感じ
ロープがちょっと線うるさいかもしれませんが、LT変換画面のテクスチャ線画のタブで線検出の値を下げるなどしましょう
よりベターなのはマテリアル「全白」にして線画抽出する方法です
オブジェクトを選択して出てくるメニューの右から3番目のアイコンをクリックすると設定してあるマテリアルが表示されます
全白を選択すると一切のテクスチャが消えます
これでレンダリングすることで余計な木目やロープのテクスチャがトーンや線に現れるのを防げます
パーツごとに色分けしたマスクもありますので色味の調整などにお使いください
種類
それぞれパーツ構成は上のオブジェクトリストとおおむね同じですが必要ない蓋など非表示などしています
リットル数は大まかな目安です
左から
8リットルA（蓋2×ハンドル）、8リットルB（蓋1×つまみ） 板8枚で構成
8リットルA（蓋2×ハンドル）、8リットルB（蓋1×つまみ） 板8枚で構成
（本体部寸法：直径28.3ｃｍ高さ27.2ｃｍ 板８枚で構成）
１３リットル先細（蓋2種をずらして表示）
（本体部寸法：直径34.8ｃｍ高さ38ｃｍ 板８枚で構成）
２２リットルA（蓋1×つまみ）、２２リットルB（蓋2×ハンドル）
（本体部寸法：直径43.6ｃｍ高さ36.7ｃｍ 板10枚で構成）
Category 1 カテゴリ1
Other materials by はるまき
Popular “Material catalog” materials
New materials
Badges
-
MVP ◆This user has contributed greatly to the management of the community, by posting many great responses to the questions asked. Once every three months, MVPs are determined based on the points earned during that period and will be recognized accordingly. -
New Valuable Player (NVP) ◆These are the next-best contributors to the community after MVPs. This is awarded to users who have not yet won an MVP award, based on the number of points they have earned. -
Official Expert ◆Chosen out of all MVP awardees, who are already proof of excellence, this is a testimony of outstanding correspondence in the community. After careful screening, they are appointed by CELSYS and assume their position.Note: Formally called “Evangelists” -
Official Moderator of CELSYS ◆Moderators are official CELSYS staff members who are fluent in Japanese as well as various other languages. Moderators are not experts on the software or illustration, so they are not able to directly answer your questions. However, moderators provide communication and language support to ensure that everyone can smoothly communicate with each other. -
CELSYS official accountThe Official Administrator Account
Pens & Brushes
Stamps
Background
Patterns
Pose
3D