漫畫邊框蒙版 + BLOCKING [v3.4] (Mask for Comic Borders+BLOCKING [v3.4]) Mask for Comic Borders+BLOCKING [v3.4]
素材ID:2165712
-
611
更新和改進的自動動作設置為隱藏/遮罩漫畫邊框和塊區域(新)!
注意:不適用於 DEBUT 使用者。此資產可以在 PRO 中使用,但SPREAD自動作除外。如果出現錯誤,請聯繫我,以便我改進資產。將保持免費至 3 月 28 日。
Updated & Improved Auto action set to hide/mask comic borders and block areas(new)!
NOTE: Not available for DEBUT users. This asset can be used in PRO except for SPREAD autoactions. Contact me if errors come up so I can improve the asset. Will remain free until 28th March.
基本







- 👁️ - 在創建蒙版後顯示您的「塊」或選區庫
- ❌ - 在創建蒙版后隱藏您的塊
- “BLOCK [自定義] - 頂部” - 圖層頂部的蒙版
- “BLOCK [custom] - Current” - 當前位置的 掩碼
- “塊 [自定義] - 頂部/反轉” - 在圖層頂部反轉蒙版
- “塊 [自定義] - 電流/反轉” - 在當前位置遮罩和反轉
- “阻止 [自定義] - 選擇” - 在當前位置遮罩 您的活動選擇 ▼
- “塊 [自定義] - 選擇/反轉” - 遮罩並反轉 您的活動選擇
- 必須 啟用 您的 漫畫設置,此自動作才能正常工作。如果沒有,那麼 自動作將自動使用畫布的邊緣, 它看起來會很奇怪!
- Mask 設置為草稿圖層,這樣您就不會意外地匯出帶有蒙版可見的漫畫。
- 為了清晰起見,圖層蒙版區域 會自動 隱藏
- 掩碼邊緣可能會顯示較小的誤差幅度,但 可以忽略不計。
- 如果出現 此錯誤,請按兩下YES。 可能是冗餘錯誤。
transcript: “目前無法執行 [Top]。你不想繼續嗎?按兩下YES。
- 漸變不包括在自動作中。
- 如果蒙版看起來很奇怪,您應該先檢查您的漫畫設置。
- 例外情況: 如果您的面板滲出頁面,則此自動作不會考慮這一點,因為它僅關注漫畫邊框設置。但是,您可以在面板的邊框內進行選擇並擦除蒙版的某些部分。
- 沒有 作用選取的 BLOCK [選擇區] 類型將填滿整個畫布!
結論
感謝您下載此資產。使用的所有藝術都是由我 繪製的(“Cosmic Alice :: Underwater Adventure”漫畫)和 CSP 預設材料。希望這對任何覺得它有用的人有所説明。如果出現任何錯誤或 您有改進它的想法建議,請與我聯繫。 請以您能想到的任何創造性方式使用自動作,祝您玩得開心! ( = w = )Vm
BASICS







- 👁️ - shows your "block" or selection base after creating mask
- ❌ - hides your block after creating mask
- "BLOCK [custom] - Top" - mask at top of layers
- "BLOCK [custom] - Current" - mask at current position
- "BLOCK [custom] - Top/Inverted" - inverts mask, on top of layers
- "BLOCK [custom] - Current/Inverted" - masks & inverts at current position
- "BLOCK [custom] - Selection" - mask your active selection at current position▼
- "BLOCK [custom] - Selection/Inverted" - masks & inverts your active selection
- Your Comic Settings must be enabled in order for this auto-action to work. If not then the auto-action will automatically use the edge of your canvas and it will look weird!
- Mask is set to draft layer so that you don't accidentally export the comic with the mask visible.
- layer mask area is automatically hidden for clarity
- mask edges might show a small margin of error but it is negligible.
- If this error appears click YES. Likely a redundancy error.
transcript: "Currently [Top] cannot be executed. Do you want t proceed?". Click YES.
- Gradient is not included in the autoaction.
- If the masking looks weird you should check your comic settings first.
- Exceptions: if your panel bleeds out the page, this autoaction will not account for that because it's focused only on the comic border settings. BUT you can select inside the border of the panel and erase parts of the mask.
- BLOCK [Selection] types without an active selection will fill the whole canvas!
CONCLUSION
Thank your for downloading this asset. All art used is drawn by me ("Cosmic Alice :: Underwater Adventure" manga) and from CSP default materials. Hopefully this helps anyone that finds it useful. Contact me if any error occurs or if you have idea suggestions to improve it. Please use the autoactions in any creative way you can think of, have fun! ( = w = )Vm
掩碼 + 阻止 v3.4 自動作 MASK + BLOCKING v3.4 autoaction
▣▣PAGE SPREADS 的塊 blocks for ▣▣PAGE SPREADS
單塊 single block
更新歷史記錄
2025.04.11 -- 在 V3.4 中添加了 BLOCKING 自動作,以實現靈活的用途,併為您想要使用的任何方式添加了單個塊材質
2025.04.7 -- 延遲更改為 Clippy
2025.03.26 -- 將自動作編輯到 V3.3 以隱藏圖層蒙版(我忘了我預設有這個設置 =_=:) 這將隱藏圖層蒙版,無論你是否打開這個設置。
2025.03.24 -- 由於上傳材料有錯誤,我刪除了 v3.2,V3.3 是更正,我不打算刪除
2025.03.20 -- 修訂了資產版本 3.2 並添加了 SPREAD作
2025.04.11 -- added BLOCKING autoactions to V3.4 for flexible purposes, plus a single block material for however you wanna use it
2025.04.7 -- delayed to change free to clippy
2025.03.26 -- edited the autoaction to V3.3 to hide layer mask (I forgot I had this setting by default =_=:) this will hide the layer mask whether you have this setting on or off regardless
2025.03.24 -- I deleted v3.2 due to errors in the uploaded materials, V3.3 is the correction which I don't plan on deleting
2025.03.20 -- revised and added the SPREAD actions to Version 3.2 of the asset
過去版本