・Material data (original picture)
main color: Black, sub color: White
Size: Up to W 33 x H 55 mm (depending on design) 600 dpi
*About 85 mm including margins
・ 4 types of brushes (stamp type)
・Bonus
32 original images
layer template 1 points
Total 37 points
The original purpose was to draw a phosphorescent light that floats softly,
If you try to express a sense of speed by attaching a tail,
The trial drawing was a lot of fun! Are.
【Fluffy Phosphorescent】Series
【Fluffy phosphorescent 0.5】
The light source is small
【Fluffy phosphorescent 1】
The light source is large
【Fluffy phosphorescent 2】
The light source is large and slightly tailed
【Fluffy phosphorescent 3】
The light source is large and tailed
* [ 0.5 ] is because the gradation of the tail did not give a satisfactory finish
I didn't make it.
[Fluffy phosphorescent 2] and [3] are a sense of speed, etc.
I added a tail to make it easier to express flow and momentum.
Left) [Phosphorescent 1] Middle) [Phosphorescent 2] Right) [Phosphorescent 3]
*In Thickness described below, the numerical value is set to "Thickness: 80".
* Since it is a stamp type, the tail does not bend.
As with Mr./Ms. pull, two sets of original drawings, one with a light source and one without a light source,
A total of 16 original drawings are included in one brush.
Remove unnecessary original drawings, add new ones (search tag: p), etc.
Make it easy to use customize.
Left) [Phosphorescent 1] Early
Medium) I pulled out many original pictures without light source (-) at the end of the original picture name.
Right) I pulled out many of the original images with light sources.
* I changed the arrangement of the original drawing while checking the appearance.
tool property The basic operation is the same as the free sample (ID: 2100442).
h) Thickness
Specify the thickness (width) of phosphorescence.
If you lower the number, it will become vertical, which can express a sense of speed.
It is located in [Fluffy phosphorescent 2] and [ 3 ].
* [ 0.5 ] and [ 1 ] just do not appear in the tool property,
It can be adjusted in the same way with 《sub tool detail→brush tip→ thickness》.
About the original drawing
The center of the light source is the drawing axis.
α )Drawing axes
β )When drawn with lime green width of particle size (spraying effect
or Brush width (spraying effect: off when drawing
* The actual drawing size will be about half of the set value.
It is not particularly relevant for the initial setting (drawing with spraying effect),
When expressing in a row, we intentionally made it easier to arrange the light sources.
Left) Draw with spraying effect Right) spraying effect: Draw with off
* The red line is the drawing axis.
↓ Operation Mr./Ms. pull video
Please customize to your liking in the 《sub tool detail→brush tip》 settings.
【 Phosphorescent 0.5 】 【 phosphorescent 1 】, etc., the margin is very large.
When drawing with the initial setting, by matching the brush size
The basic size of the halo is also aligned.
Thank you for your understanding.
↑ I drew each brush with the same brush size.
Drawing example (1920 x 1472px 600dpi)
Since it is a stamp type, it is also possible to draw one pom-pom at a time.