Custom tile roof small (カスタム瓦屋根小) カスタム瓦屋根小

Content ID:2095770

  • 45
This material can be used in Studio Mode. (What is Studio Mode?)

This is a tile roof with a variable number of tiles created for drawing assistance.
It can be adjusted in 1~5 rows and ~20 rows.
作画補助のために作成した瓦枚数可変の瓦屋根です。
1~5段、~20列で調整できます。

The site is roughly divided into five parts: center, right, right, left, and left.



【Roof slope】

The slope of the roof is set to 21.8° by default.
The angle can be changed by rotating the X-axis of the child object [*_**_1_Tile Roof] of each part.



[Adjustment of the number of tiles (stage)]

You can change the number of vertical tiles in the layout. You can choose from 1~5 steps.


[Adjustment of the number of tiles (column)]

The number of tiles is 20, 6 rows for the center, right, and left parts, and 1 row for the right and left edges.
The roof tiles are spaced at intervals of 30 (cm), and the rafters are spaced 60 (cm) apart.
If you want to adjust the number of rows, shift the part in units of 30 (cm), and if you are concerned about the width of the rafters, shift the part in the X axis in units of 60 (cm).
If you hide the edges and connect several of these materials, you can make a longer roof.




【Adjustment of the main house】

The parts of the main house were difficult to use if they were individually attached to the roof.
It has become an almost independent object.
When using less than 20 rows of tiles, reduce the width of the entire purlin.




【object List】



[Usage example and LT conversion example]


部位は大まかに中央、右、右端、左、左端の5つに分かれています。



【屋根の勾配】

屋根の勾配は初期値で21.8°に設定しております。
各部位の子オブジェクト[*_**_1_瓦屋根]のX軸回転で角度を変更可能です。



【瓦枚数の調整(段)】

レイアウトで縦の瓦枚数を変更できます。1~5段から選択できます。


【瓦枚数の調整(列)】

瓦の枚数は中央、右、左の部位が6列、右端と左端の部位が1列、合計20列です。
瓦は30(cm)間隔で並んでおり、垂木は60(cm)間隔で配置されています。
列数を調整をしたい場合は30(cm)単位で、垂木の幅を気にする場合は60(cm)単位で部位をX軸方向にずらしてください。
端を非表示にしてこの素材を複数つなげればもっと長い屋根も作れます。




【母屋の調整】

母屋の部位は屋根に個別に引っ付いていると使いづらかったので、
ほぼ独立したオブジェクトになっています。
瓦20列未満で使用する場合は、母屋全体の幅を縮小して利用してください。




【オブジェクトリスト】



【使用例とLT変換例】


material マテリアル

  • default material 初期マテリアル

arrangement 配置

  • 1x20 1x20
  • 2x20 2x20
  • 3x20 3x20
  • 4x20 4x20
  • 5x20 5x20
  • 1x20 (rafters not shown) 1x20(垂木非表示)
  • 2x20 (rafters not shown) 2x20(垂木非表示)
  • 3x20 (rafters not shown) 3x20(垂木非表示)
  • 4x20 (rafters not shown) 4x20(垂木非表示)
  • 5x20 (rafters not shown) 5x20(垂木非表示)
  • 1x20 (purlin display) 1x20(母屋表示)
  • 2x20 (purlin display) 2x20(母屋表示)
  • 3x20 (purlin display) 3x20(母屋表示)
  • 4x20 (purlin display) 4x20(母屋表示)
  • 5x20 (purlin display) 5x20(母屋表示)
  • 1x20 (Nose Dial・Broken Wind Plate Display) 1x20(鼻隠・破風板表示)
  • 2x20 (Nose Barrier Breaker Display) 2x20(鼻隠・破風板表示)
  • 3x20 (Nose Shogun, Broken Windboard Display) 3x20(鼻隠・破風板表示)
  • 4x20 (Nose Sho Plate Display) 4x20(鼻隠・破風板表示)
  • 5x20 (nose board, broken wind board display) 5x20(鼻隠・破風板表示)
  • 1x20 (Mother House, Nose Gap, Broken Wind Plate) 1x20(母屋・鼻隠・破風板表示)
  • 2x20 (Mother House, Nose Duck, Broken Wind Plate Display) 2x20(母屋・鼻隠・破風板表示)
  • 3x20 (Mother House, Nose Holder, Broken Wind Plate Display) 3x20(母屋・鼻隠・破風板表示)
  • 4x20 (Mother House, Nose Corner, Broken Wind Plate Display) 4x20(母屋・鼻隠・破風板表示)
  • 5x20 (Mother House, Nose Duck, Broken Wind Board) 5x20(母屋・鼻隠・破風板表示)

Content ID:2095770

Published : 1 day ago

Last updated : 1 day ago

於茅(おかや)'s profile Go to profile

於茅(おかや)と申します。 漫画家アシスタントをしております。 お仕事を効率化するためによく素材を作っておりますので、公開できそうな品質に届いたものから公開をしていきます。