Room wear wrinkle reference 3D (部屋着 シワ参考用3D) 部屋着 シワ参考用3D

Content ID:2087924

  • 3,686
  • Free
This material can be used in Studio Mode. (What is Studio Mode?)

I'm going to put an outline on it! But wrinkles! I don't know how wrinkles appear from this angle! !!
This is a reference 3D model when drawing wrinkles for you.
It is made with 3D software for clothes, so it is a realistic wrinkle.
It is made of high polygons to express the natural wrinkles peculiar to the fabric.
Therefore, if you have a computer with low specifications, the load may be high.
輪郭線はかけるのよ!でもシワが!この角度から見たシワの出方が分からない!!
そんなあなたのためのシワを描くときの参考用3Dモデルです
洋服用の3Dソフトで作ってあるのでリアルなしわになっています。
布特有の自然なしわを表現するために高めのポリゴンで作ってあります。
そのためスペックの低いパソコンだと負荷が高いかもしれません。


Just by looking for materials with just the right angle, you will notice it in a few hours ...

Since it is 3D, you can check it by turning it around to the angle of "I want to know the folds of this angle!!"
 
If you don't want it to wrinkle the same as others, move the position of the light source.
Changing the light source changes the place where the light hits, so the wrinkles that emerge look different.


※Not movable
The wrinkles on clothes change depending on the pose every time you move.
However, CLIP STUDIO does not have a function to simulate the movement of wrinkles, so it is fixed.
The main part of this data is clothing. Not the human body.

◆Surface Material◆


There are a total of five types of surface materials: gray checkered, plain white, and plain light blue with vertical and horizontal stripes.


You can use it as a reference for wrinkles only, or you can rasterize 3D and use it as it is, and please use it to shorten the time of drawing.

If you remove the apply light source check box, you can extract only the outline neatly.

◆Example of use◆
How to easily draw wrinkles like that even for people who don't have a penchant for drawing


Call up the 3D model and adjust it to your preferred angle.


Create a new layer and draw a noticeable wrinkle on that layer.

Select the model in the 3D layer and open the [sub tool detail palette]. (When you select 3D, press the spanner icon that appears below)


If you clear the check box of [apply light source] on the [Shadow] tab, it will be only an outline line.

If there is an outline line that disappears, turn on the light source once and shoot the place where the line disappears.
In order to make it easier for me to draw illustrations, not as a modeler, I made and pasted textures in advance with lines that increase the amount of information about the clothes, such as seams and seam boundaries.
(The color of the wrinkle lines has been changed for clarity.) In fact, please draw it in your favorite color)


If you want to use it as it is, convert it in the order of [Right-click]-[rasterize]→ on the layer of the 3D model to make it a line drawing as it is on the display.


The raw body of the 3D model is slightly realistic M size, so depending on the touch to be drawn, please adjust it by deformation after rasterize.

There are other 3D materials


There are also skirts and trouser yukatas, so please use the ones that can be used from other materials of the Usako dressmaking workshop below to save time and improve quality.
You can use the original texture (surface material) as it is, or you can add a pattern as a guide! Please use it with your favorite pattern.
I tried various things, but clothes seem to be incompatible with TL conversion.

ちょうどいい角度の資料を探すだけで気づいたら数時間とか…。

3Dなので「この角度のヒダが知りたいのよ!!」という角度までぐるぐる回して確認ができます。
 
他の人と同じしわにしたくない場合光源の位置を移動させてください。
光源を変えると光が当たる場所が変わるので、浮かび上がるシワが違って見えます。


※可動しません
洋服のシワは動くたびポーズによって変わります。
しかしクリスタではシワの動きをシミュレーションする機能はないため、固定となります。
このデータのメインは服です。人体ではありません。

◆表面素材◆


表面素材は灰色市松、白無地、縦じま横縞水色無地の計5種類です。


しわだけの参考にするもよし、3Dをラスタライズしてそのまま使うも良し作画の時短にお役立てください。

光源の影響を受けるのチェックボックスを外すときれいに輪郭だけ抜き出せます。

◆使用例◆
絵心がない人でも簡単にそれっぽくしわを描く方法


3Dモデルを呼び出し好みの角度に調整する。


新しいレイヤーを作ってそのレイヤーに目立つしわをなぞって描く。

3Dのレイヤーでモデルを選択してから【サブツール詳細パレット】を開く。(3Dを選択したときに下に出てくるスパナのアイコンを押すと出てくる)


【陰影】タブの【光源の影響を受ける】のチェックボックスを外すと輪郭線だけになります

消えてしまう輪郭線がある場合、一度光源をオンにして、線が消える所も写す。
モデラーとしてではなく自分がイラストを描きやすいように、縫い目や縫い合わせの境目など服の情報量が上がるようなラインをあらかじめテクスチャを作って貼ってあります。
(分かりやすいようにしわの線の色を変えてあります。実際は好きな色で描いてください)


そのまま使う場合は、3Dモデルのレイヤーの上で【右クリック】-【ラスタライズ】→という順で変換するとディスプレイ上のまま線画になります。


3Dモデルの素のボディがややリアルMサイズなので、描かれるタッチによってはラスタライズ後、変形などで調整してご利用ください。

他にも3D素材があります


他にもスカートやズボン浴衣などありますので↓下のうさこの洋裁工房の別の素材から使えそうなものを時短やクオリティアップにご活用ください。
元からついているテクスチャ(表面素材)をそのまま使っても良し、目安にして柄を入れても良し!好きな柄でお使いください。
色々試しましたが洋服はTL変換と相性が悪いようです。

Material マテリアル

  • Whitening in the room 部屋着白
  • Horizontal stripes 横縞
  • Vertical stripes 縦縞
  • Blue 水色
  • Checkered 市松

Place 配置

  • default layout 初期レイアウト

Angle アングル

  • Ago
  • After
  • Left
  • Right
  • Diagonally right 斜め右
  • Diagonally left 斜め左
  • Distant eyes 遠目
  • Ago
  • After

Content ID:2087924

Published : 22 days ago

Last updated : 8 days ago

うさこの洋裁工房's profile Go to profile

洋裁の先生です。 リアルに服を作ったり 3Dで服を作ったり 洋服の作り方を教えたりしています。 洋裁の漫画や動画やアニメやアプリも作ってるよ。

Other materials by うさこの洋裁工房

Popular “3D object” materials

New materials