2022/07/19 update ... added "55-wire" and "Greske".
※ This is the same material as "Paste change easy toning Set". We have changed the public settings of the ASSET and have re-released it.
The benefits of this action >
You can easily change the concentration and number of lines after pasting.-Do not use the mask when pasting, you can use the mask for scraping and other uses.
It can be pasted not only a normal tone but also a white tone and a betta.
Zuraselu the repeated tones easily.
The palette color of the net tone and the sand eyes are connected with the concentration of the tone and are easy to grasp.
Steps >
① "Tone preparation" (if you want to put a white tone, click "white tone Preparation"). Fill the area where you want the tone to be.
Select the concentration you want ②(5% to 90%, or 5% to 40% sand).
③ If you want to change the roughness further select the number of lines and roughness (initial state Ami: Manuscript setting, sand Eyes: 50/0).
If it does not come nicely to try to put, it is also possible to change the concentration and number of lines later.
You can also change the eyes ← → sand.
-"Stickiness" is converted to solid. Also possible to tone again.
"Orchard", "Rough dot A and B" is a coarse net tone often used in the cartoon girl.
Orchard/Small is suitable for making manuscripts with B5 scale.
When you want to shift the tone that you piled up, please press "tone shift A and B" several times to adjust.
- [Diluted specification] is a bonus.
It is an action to convert a specified layer that an assistant receives from the writer to a thin draft layer.
It is safe to remove it because it is not necessary for the person who finishes it by oneself.
* DX has a lot of settings, so there is no need to scroll, both the set of " tone preparation" and "white tone preparation " are provided on the upper and lower sets.
The above and below are the same actions, so it's OK to delete them if you don't need them.
Note :the 55-wire and 65-ray recording, but it is treated with the same roughness as 50 lines, 60 lines on the 600dpi. The 55-and 65-wire lines are 1200dpi in different lines.
If the 600dpi manuscript is the Lord, it may be better to remove the 55-wire and 65-ray to avoid confusion.
2022/07/19 更新 ・・・ 「55線化」と「グレスケ化」を追加。
※ こちらは「貼り替えしやすいトーン化セット」と同じ素材です。ASSETの公開設定を変更して再公開いたしました。
<このアクションのメリット>
・貼った後から濃度や線数などを簡単に変更できる。・貼る際にマスクを使わないので、削りや他の用途にマスクを使える。
・通常のトーンだけでなく白トーンやベタも貼れる。
・重ねたトーンを簡単にずらせる。
・網トーンと砂目のパレットカラーがトーンの濃度と連動し、把握しやすい。
<手順>
① 「トーン準備」(白トーンを貼りたい場合は「白トーン準備」)をクリック。トーンを貼りたい箇所を塗りつぶす。
② 貼りたい濃度(アミ5%~90%、あるいは砂目5%~40%)を選択。
③ 更に粗さを変更したい場合は線数・粗さを選択(初期状態はアミ:原稿設定、砂目:50/0)。
● 貼ってみてしっくり来なければ、後から濃度や線数を変えることも可能です。
アミ←→砂目の変更もできます。
・「ベタ化」はベタに変換されます。再びトーンにすることも可能。
・「果樹園」「ラフドットA・B」は、少女漫画などでよく使う粗めの網トーンです。
「果樹園・小」はB5原寸で原稿を作る時に向いています。
・重ねたトーンをずらしたい時は「トーンずらしA・B」を適当に何度か押して調整してください。
● 「指定薄め」はオマケです。
アシスタントをする人が作家さんから受け取った指定のレイヤーを、薄い下描きレイヤーに変換する為のアクションです。
自分で仕上げをする人には必要ないので削除して大丈夫です。
※ DXは設定項目が多いため、スクロールの必要がないよう、セットの上下両方に「トーン準備」「白トーン準備」を設けています。
上下とも同じアクションですので、必要ない場合はどちらか削除しても大丈夫です。
補足: 55線化・65線化を収録しましたが、600dpi上では50線・60線と同じ粗さで処理されるのでご注意ください。55線と65線は、1200dpiで線数の違いがでてきます。
600dpiの原稿が主の方は、混乱しないよう55線化・65線化も削除していいかもしれません。