Chinese lattice door (with partition and transom), 3 types of lattice switchable and open/close (中華格子扉(隔扇・欄間つき)格子3種切替・開閉可動) 中華格子扉(隔扇・欄間つき)格子3種切替・開閉可動
It is a 3D material of lattice doors (bulking fans) often seen in Chinese-style buildings.
It is a set of four pillars, transoms, and doors, and the two in the center open and close with a kannon opening.
The lattice is a set that combines traditional standard patterns with original patterns.
中華風の建物でよく見る、格子扉(隔扇)の3D素材です。
柱・欄間・扉4枚がセットになっていて、中央の2枚が観音開きで開閉します。
格子は、伝統的なスタンダードな柄と、オリジナルの柄を組み合わせたセットです。





■ Contents
・ 4 doors (2 in the center can be opened and closed), 2 transoms, pillar, upper frame
・ The pattern of the lattice can be switched from 3 types
(1 traditional pattern + 2 original patterns)
・Size: Width approx. 3.2m × Height approx. 3.45m (Door height approx. 2.6m)
・The material is all white.
■ How to use
In the tool property of the object tool, you can:
(1) You can select individual parts from the ▼ of "Chinese lattice door ...".
(2) In "Layout", you can switch the pattern of the lattice and open and close the door.
(3) You can adjust the line width with "outline width".

■ Adjustment recommendations
The engraving and lattice are fine, so adjust them according to the size you use.
・Light source: You can change the intensity of the shadow with "Parallel Light Intensity".
・LT conversion (line drawing extraction) *EX only:


If the line is too fine, you can make the outline wider or increase the resolution of the canvas before converting it to make it look cleaner.
■ About lattice alone
Materials with only lattices will also be sold sequentially in different patterns and sizes (vertical, square, and horizontal). If you want a pattern that is not in this door, or if you want to use only the lattice, please use that as well.
■ Caution
・There is no color. Please apply and use it as you like.





■ 内容
・扉4枚(中央2枚は開閉可動)、欄間2枚、柱、上枠
・格子の柄は3種類から切り替えられます
(伝統的な柄1種+オリジナル柄2種)
・大きさ:幅 約3.2m × 高さ 約3.45m(扉の高さ 約2.6m)
・マテリアルは白一色です
■ 使い方
オブジェクトツールのツールプロパティで、次の操作ができます(画像参照)。
① 「中華格子扉…」の▼から、パーツを個別に選べます。
② 「レイアウト」で、格子の柄の切り替えと、扉の開け閉めができます。
③ 「輪郭線幅」で、線の太さを調整できます。

■ 調整のおすすめ
彫刻や格子が細かいので、使うサイズに合わせて調整してください。
・光源:「平行光強度」で陰影の強さを変えられます。
・LT変換(線画抽出)※EXのみ:


線が細かすぎるときは、輪郭線の幅を太めにするか、キャンバスの解像度を上げてから変換するときれいに出ます。
■ 格子単品について
格子だけの素材も、柄・サイズ違いで順次販売予定です(縦長・正方形・横長)。この扉に入っていない柄が欲しい方や、格子だけを使いたい方は、そちらもご利用ください。
■ 注意
・色はついていません。お好みで塗ってお使いください。
Material マテリアル
-
default material 初期マテリアル
Configuration 配置
-
default layout 初期レイアウト
-
Lanterns 灯籠
-
Ruyi Cloud 如意雲
-
No lattice 格子なし
pose parts 可動パーツ
-
Door_Open Right_Inside 扉_右を開く_内側
-
Door_Open Right_Outside 扉_右を開く_外側
-
Door_Open Left_Outside 扉_左を開く_外側
-
Door_Open Left_Inside 扉_左を開く_内側