. .
[Fill tool]

If you already have a good tool, you don't need it.
Among beginners who find it difficult to handle the setting
Please use it if you do not have this tool
\(^___^)/
1. When the lines of the pen are thin and thin, the corners will be blank when you try to fill them
or
2. When drawing a little lower resolution, the gaps will be empty.
↓↓↓↓↓↓
(When the ends of the hair are empty after filling_)

ᅳᅳᅳᅳᅳᅳᅳᅳᅳᅳᅳᅳᅳᅳᅳᅳᅳᅳᅳᅳᅳᅳᅳᅳᅳ
Even after using the fill tool like this, when the gap is empty!!!
If you fill in the gaps using basic tools,
Corners are bunched up or
The line drawing becomes too thick.
There is a staircase phenomenon
Inconveniences often happen
Among the basic tools
When you use "Paint on less painted areas"


The lineart itself can get messy.
Among the basic tools
When using "Envelop and paint"


It can also clump together in the corners and cause lines to pop out
ᅳᅳᅳᅳᅳᅳᅳᅳᅳᅳᅳᅳᅳᅳᅳᅳᅳᅳᅳᅳᅳᅳᅳᅳᅳᅳ
However, this "pointed closure noose"
Lines do not clump together or thicken,
Only the gaps are filled in correctly

※ Notes
It's a tool based on reference layers.
Hang a reference layer on your lineart
After that, use the tool on the coloring layer

I hope ♥ it will be helpful to beginners who find it difficult to touch the settings ♥
Let's go!!
[채우기 도구입니다]

이미 좋은 도구가 있으신 분들은 필요 없으시겠지만
설정을 다루기 어려운 초보분들 중
해당 도구가 없는 분들이 이용해주세요
\(^___^)/
1. 쓰는 펜의 선이 얇고 가늘 때, 채우기를 시도하면 모서리가 비어버립니다
or
2. 해상도를 조금 낮게 그릴 때 틈새가 비어버립니다
↓↓↓↓↓↓
(채우기 후 머리카락 끝이 비어버릴때 ㅠ_ㅠ)

ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
이렇게 채우기 도구를 이용한 후에도 틈새가 비었을 때 !!!!
그 틈새를, 기본 툴을 이용해 채우면
모서리가 뭉쳐지거나
선화가 너무 두꺼워져 버리거나
계단현상이 생겨버려서
불편한 일이 생기곤 합니다
기본 툴 중에
"덜 칠한 부분에 칠하기"를 사용했을 때


선화 자체가 지저분해 질 수 있습니다.
기본 툴 중에
"에워싸고 칠하기" 를 사용했을 때


모서리에 뭉쳐지며 선이 튀어버리는 경우도 발생합니다
ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
하지만 이 "뾰족 마감 올가미"는
선이 뭉쳐지거나 두꺼워지지 않고
빈틈만 정확히 채워집니다

※ 참고사항
참조 레이어를 기반으로 한 툴이므로
선화에 참조레이어를 걸어두세요
그 후에 채색 레이어에서 도구를 사용해주세요

♥ 설정 만지기가 어려운 초보자 분들께 도움이 되었으면 좋겠습니다 ♥
화이팅!!
Pointed finish 뾰족마감