Kitchen sink right (キッチン　シンク右) キッチン　シンク右

Content ID：2054565

2,408

- Report to administrator

200 CLIPPY

hutaba_nito_3D

This material can be used in Studio Mode. (What is Studio Mode?)

A new version is available.

Translated by

It is a 3D material for the kitchen.
Please use it in the background where the kitchen is reflected or in the cooking scene.

Since the data is divided into small pieces, please hide unnecessary parts for each scene.

The data has been corrected.
If you have already downloaded it, we apologize for the inconvenience, but please download it again.

キッチンの3D素材です。
キッチンが映る背景や、料理のシーンでご活用ください。

データを細かく分けているので、シーンごと不要な部分は非表示にしてご使用ください。

データの修正をいたしました。
既にダウンロードくださった皆様は、お手数ですが再ダウンロードをよろしくお願いいたします。

(1): [Kitchen sink right]

The set contents will be the same as the 3D material with the sink on the left.
Please download and use the orientation you need.

↓ [Sink left] The content ID is here.
Content ID: 2054653

(2): [object list]

- Number of object: 42

(3): [3D Object of each]

◆ Main body

◆Lid stand
Ladle
Dishes
Lid

◆ Kitchen rack
Ladle
Oil-based -1
Oil-based -2
Oil-based -3
Kitchen Paper
Kitchen Paper Hook
Kitchen rack
Pasta ladle
Fly back
Wrap 22cm
Wrap 30cm
Wrap Placement
Instrument hook
Whisk
Seasoning-1
Seasoning-2
Seasoning hook

◆Frying pan 26cm
Frying pan lid 26cm

◆Ceiling shelves
Right Shelf Right Door
Right shelf Left door
Ceiling Shelves
Ventilation fan
Middle Shelf Door

◆Faucet
Lever
Water outlet

◆Others
Stove side storage right door
Stove side storage left door
Stove right dial right
Stove right dial left
Left dial on stove right
Left Dial on the stove Left
Stove drawer right
Stove drawer left
Storage under sink right door
Storage under sink left door
Drawer Middle

(4): [Layout]
◆With lid
When you press the red circle "Select a layout preset", the set layout will appear.

◆No lid

◆No frying pan

(5): [Range of motion]
Press the red circle "Select pose parts preset" to bring out the set range of motion.

(6): [LT conversion setting]

●Sample LT conversion settings
Resolution: 600dpi Monochrome B4 manuscript paper size
raster layer
Line width: 0.08mm
Detection accuracy: 80~

☑ Adjust the system according to the size of the scene
Outer border emphasis: 50
☑Depth
* Please refer to the graph in the image above.

☑ tone work
☑ Refinement
30% and 10%
I set the ratio of each graph at about 1/3 of each.

(7): [LT conversion sample]

* The following is an explanation of the combination of other materials that have already been released.

This is an explanation of how to combine [kitchen sink] and [kitchen storage shelf (refrigerator].

(1) Drag and drop the 3D material data in the direction you want to use to the desired location.

(2) Drag and drop the 3D material you want to match onto the layer of the 3D material set earlier.

(3) Then a 3D material with the same floor height will be added to the canvas.

※Note※
If you drag and drop directly on the canvas, it will be pasted in a strange place, so be sure to drag and drop to the layer of the 3D material you want to match.

(4) First, adjust the angle so that it is easy to see.
Place the cursor on the [Rotate Camera] icon in [Move manipulator] in the upper left corner.

(5) Click and hold the camera icon and set the angle to a bird's-eye view.

(6) After taking a bird's-eye view, click anywhere on the added material.
Then the manipulator appears.
Hover over the yellow-green ring of the manipulator that appears.
When combined, it turns orange.

(7) You can change the angle by dragging after combining.

1⃣ If you drag from memory to memory 2⃣, it will be exactly 180°.

* This time, in "Operation"
☑Snap 3D Models
Rotation snap angle 5°
(The snap target is the above position, rotation, scale)
Since it is checked, the memory and box are displayed.

(8) After adjusting the angle, place the cursor on the arrow extending from the center of the manipulator.
When combined, it turns orange.

(9) Place the cursor and drag.

(10) Place the cursor on the [Rotate camera] icon in [Move manipulator] on the upper left edge and adjust the angle to make it easier to see.

(11) It is easier to operate by moving it in the canvas with "move layer" of the tool.

(12) Adjust the overall size with the [Move camera forward and backward] icon in [Move manipulator] third from the left.
Drag up to shrink. Drag down to enlarge.

(13) tool property adjust the direction in which the light shines with the "light source" in [object].

(14) LT conversion is completed.
After that, please try to adjust it by coloring and adding and correcting shadows.

(15) You can do the same operation with another 3D material.

Here are the materials used in the sample.

[Kitchen storage shelf (refrigerator left)]
Content ID: 2048756

[Kitchen storage shelf (refrigerator right)]
Content ID: 2048760

①：【キッチン　シンク右】

シンクが左側にある3D素材とセット内容は同じになります。
必要な向きをダウンロードしてご使用下さい。

↓【シンク　左】コンテンツIDはこちらになります。
コンテンツID：2054653

②：【オブジェクトリスト】

●オブジェクト数：42

③：【それぞれの3Dオブジェクト】

◆本体

◆ふたスタンド
　お玉
　お皿
　ふた

◆キッチンラック
　お玉
　オイル系-1
　オイル系-2
　オイル系-3
　キッチンペーパー
　キッチンペーパーフック
　キッチンラック
　パスタレードル
　フライ返し
　ラップ22cm
　ラップ30cm
　ラップ置き
　器具のフック
　泡立て器
　調味料-1
　調味料-2
　調味料系フック

◆フライパン26cm
　フライパン蓋　26cm

◆天井　棚
　右側　棚　右扉
　右側　棚　左扉
　天井　棚
　換気扇
　真ん中　棚　扉

◆蛇口
　レバー
　水道口

◆その他
　コンロ側収納　右扉
　コンロ側収納　左扉
　コンロ右側ダイヤル　右
　コンロ右側ダイヤル　左
　コンロ左側ダイヤル　右
　コンロ左側ダイヤル　左
　コンロ引き出し　右
　コンロ引き出し　左
　シンク下収納　右扉
　シンク下収納　左扉
　引き出し　真ん中

④：【レイアウト】
◆フタ有り
赤丸の「レイアウトのプリセットを選択します」を押すと、セットしたレイアウトが出てきます。

◆フタなし

◆フライパン無し

⑤：【可動域】
赤丸の「可動パーツのプリセットを選択します」を押すと、セットした可動域が出てきます。

⑥：【LT変換設定】

●サンプルのLT変換設定
解像度：600dpi　モノクロB4原稿用紙サイズ
ラスターレイヤー
線幅：0.08mm
検出精度：80～

☑シーンの大きさで制度を調整
外枠線強調度：50
☑奥行き
※上の画像のグラフをご参照ください。

☑トーンワーク
☑諧調化
30％と10％
グラフの割合としてそれぞれ3分の1くらいの所で設定しました。