3D model of a steel tower for transmission lines.
The tower main body is 2 species of 54.5 m and 23.5 m in height. For each of the overhead line parts, we are making two patterns of the lifting type and the suspension type.
The miniature model of 1/10 is put in the case where it is not necessary to arrange the size with other object because it is too large and is awkward in the exact size.
Material 1: Large tower (resistant to suspension)
Steel tower Large-resistant height 54.5 m
Large tower, pull-up height, 54.5 m
Material 2: Small tower (resistant/suspended)
Tower Small tolerance type height 23.5 m
• Tower small dangling height 23.5 m
Material 3: Large tower (resistant/suspended) 1/10 Miniature model
• 1/10 miniature model of large tower-resistant type 5.45 m
Tower large suspension type 1/10 miniature model height 5.45 m
Material 4: Small tower (resistant/suspended) 1/10 Miniature model
• 1/10 miniature model of tower small-resistant type 2.35 m
Tower Small suspension type 1/10 miniature model height 2.35 m
Since the production time is different, the design of the insulator only small suspension type of the tower is different.
送電線用の鉄塔の3Dモデルです。
鉄塔本体は高さ54.5m、23.5mの2種。それぞれについて架線部分が耐張型、懸垂型の2パターン作っています。
実寸だと大きすぎて割と扱いにくいので、他のオブジェクトと寸法を揃える必要がない場合用に1/10のミニチュアモデルも入れてあります。
素材１：鉄塔大(耐張・懸垂)
・鉄塔 大 耐張型 高さ54.5m
・鉄塔 大 懸垂型 高さ54.5m
素材２：鉄塔小(耐張・懸垂)
・鉄塔 小 耐張型 高さ23.5m
・鉄塔 小 懸垂型 高さ23.5m
素材３：鉄塔大(耐張・懸垂)1/10ミニチュアモデル
・鉄塔 大 耐張型 1/10ミニチュアモデル 高さ5.45m
・鉄塔 大 懸垂型 1/10ミニチュアモデル 高さ5.45m
素材４：鉄塔小(耐張・懸垂)1/10ミニチュアモデル
・鉄塔 小 耐張型 1/10ミニチュアモデル 高さ2.35m
・鉄塔 小 懸垂型 1/10ミニチュアモデル 高さ2.35m
なお制作時期が異なるため、鉄塔 小 懸垂型のみ碍子のデザインが異なります。
Both initial display states are "resistant type".
Refer to step 3 for instructions on how to switch to the "suspension type".
2. Usage Example
(23/5/22 revision)
The model and miniature model were summarized in one material, but because the adjustment of the display size after the changeover was a hassle, the same size of the steel tower together was combined into one material.
Because there is no change in the 3D model in itself, there is no problem even if I use it as it is with the DL already before the revision.
If you feel that the actual size ~ Change of miniature is bad usability, please download again.
初期表示状態はいずれも「耐張型」です。
「懸垂型」への切替方法は手順３を参照ください。
２．使い方例
(23/5/22 改定)
実寸モデルとミニチュアモデルを一つの素材内でまとめていましたが、切替後の表示サイズ調整が手間だったため、同一サイズの鉄塔同士を一つの素材内にまとめ直しました。
入っている3Dモデル自体には変更はないため、改定前にDL済の方はそのまま使って頂いても問題ありません。
もし実寸～ミニチュアの切替が使い勝手が悪いと感じている方は、お手数ですが再ダウンロードお願いいたします。
Transmission tower 送電塔
Old version
Other materials by KOSO
Popular “Material catalog” materials
New materials
-
MVP ◆This user has contributed greatly to the management of the community, by posting many great responses to the questions asked. Once every three months, MVPs are determined based on the points earned during that period and will be recognized accordingly. -
New Valuable Player (NVP) ◆These are the next-best contributors to the community after MVPs. This is awarded to users who have not yet won an MVP award, based on the number of points they have earned. -
Official Expert ◆Chosen out of all MVP awardees, who are already proof of excellence, this is a testimony of outstanding correspondence in the community. After careful screening, they are appointed by CELSYS and assume their position.Note: Formally called “Evangelists” -
Official Moderator of CELSYS ◆Moderators are official CELSYS staff members who are fluent in Japanese as well as various other languages. Moderators are not experts on the software or illustration, so they are not able to directly answer your questions. However, moderators provide communication and language support to ensure that everyone can smoothly communicate with each other. -
CELSYS official accountThe Official Administrator Account