This is a collection of 3D models of notebooks and accessories that are specially tailored for the drawing.
Two types of notebooks (Japanese-style keyboard version and English array keyboard version) are recorded plenty of accessories and.
絵を描く人のために特別な調整を施した「ノートPCと付属品」の3Dモデル素材集です。
2種類のノートPC(日本語配列キーボード版と英語配列キーボード版)と付属品類をたっぷり収録しています。


About the laptop body
31cm×22cm×1.2cm outside dimensions. The screen size is about 13.8 inches of 29cm×19cm.

Material included
Two types of notebooks are available in Japanese keyboard and English array keyboard versions.
It also includes a mouse with mouse pads and mugs with drinks.

Also included a number of accessories that can be inserted into the PC
Includes SD card, USB device (2 types), USB terminal (4 pcs), earphone pin, cable lock and key.

All the parts can be moved individually, and the display and the switch are also hidden.
The mouse and Mug cups can be used as a single material.

how to show of accessories
In the initial state, only the notebook PC is set to be displayed.
If you want to view the mouse and mug, please choose a layout by the following procedure.
Both for right- handed and left-handed layouts are available.

how to show of accessories other than the mouse and mug
All you have to do is select the accessories you want to see from object list.

How each part is movingYou can reseat the opening and closing of the monitor and any accessories inserted into the PC itself from the pose parts presets.If the monitor's number is "50", it will be just 90 degrees.

In the case of the mug, you can change the water level by manipulating the drink. A value of 100 makes the drink disappear.

Can switch screens depending on the situation
Three screens of white, black, and lattice patterns are available.

Compare three screens with LT conversion1. White represents the power on state. It is also intended to draw the screen and to refine the image.
2. Black represents a power-off state.
3. Lattice patterns are intended to be used as auxiliary lines when drawing a screen.

LT Conversion example of the entire material
If you use cables, draw them yourself.Moreover, the school desk which comes out in the example of the use is a 3D model material distributed separately.







ノートPC本体について
外形寸法31cm×22cm×1.2cm。画面サイズ29cm×19cmの約13.8インチです。

収録素材について
ノートPCは日本語配列キーボード版と英語配列キーボード版の2種類を用意しています。
マウス(マウスパッド付き)とマグカップ(飲み物付き)も付属しています。

PC本体に挿入できる付属品も多数収録
SDカード、USBデバイス(2種類)、USB端子(4個)、イヤフォン端子、ケーブルロックと鍵を収録しています。

全てのパーツは個別に動かせて、表示と非表示の切り替えも可能です。
またマウスとマグカップは単体の素材として使用できます。

付属品の表示方法
初期状態ではノートPCのみが表示されるよう設定しています。
マウスとマグカップを表示したい場合は、以下の手順でレイアウトを選択してください。
右利き用と左利き用のレイアウトを両方用意しています。

マウスとマグカップ以外の付属品の表示方法
以下の手順で「オブジェクトリスト」から表示したい付属品を選択するだけです。

各パーツの可動方法「可動パーツのプリセット」からモニターの開閉動作や、PC本体に挿入されている付属品を抜き差しできます。モニターの数値を「50」にすればちょうど90度の位置になります。

マグカップの場合は飲み物を操作して水位を変えられます。数値を100にすれば飲み物が消えます。

状況に応じて画面を切り替え可能
白、黒、格子模様の三種類の画面を用意しています。

LT変換で三種類の画面を比較1.白は電源オン状態を表現。画面を描いたり画像をハメ込む用途も想定。
2.黒は電源オフ状態を表現。
3.格子模様は画面を描くときの補助線としての用途を想定。

素材全体のLT変換例
ケーブル類を使用するときは自身で描き足してください。また使用例に出てくる学校机は別途配布している3Dモデル素材です。





Laptops and Accessories ノートPCと付属品