3D Shop Exterior Prop 1 (3D お店の外観ハリボテ1) 3D お店の外観ハリボテ1

Content ID:1815811

  • 3,302
  • 10 GOLD
  • 100 CLIPPY
This material can be used in Studio Mode. (What is Studio Mode?)

I fixed the depth and so the design intact.


It is 3D which I made referring to the United shops of the town in London. Prop specifications only on the surface.
You can make a simple city by lining up the same series.
Depth about 8m. Please note that there is no range of motion, such as windows and doors.


Because it does not necessarily come out neatly even if the LT conversion is sweet in the sweetness,
It can be recommended only for the degree that it is good if a background fills a picture like that.
As an aid of drawing, I think if you can use it, such as to retouch in the window and the sign part.



* The following LT conversion is output to the manuscript paper for B5 magazine.

▼ I put a color to be easy to see at the setting.


▼ Upper Detail



▼ Lower Detail


▼ Other Angle


▼ Because the object is divided into the first floor and the second floor or more, the camera will stop if I click "focus on editing target" after selecting the first floor part as follows.


▼ Output is reduced by placing 3D dolls in line width 0.10 mm and 100% detection accuracy.



▼ Place the same in the 奧, and the tree and the ground


▼ One, two, three
Because the back side of the roof is a plane, when I use it side by line, please correct it....

▼ 1 to 4 (4, 2, 1, 3, 2 from the front)


デザインはそのままに奥行きなどを修正しました。


ロンドンの街の連なったお店を参考に作成した3Dです。表面だけのハリボテ仕様。
同シリーズのものを並べれば簡単な街並みが作れます。
奥行き約8m。窓やドアなど可動域はありませんのでご注意下さい。


作り込みは甘めでLT変換も必ずしも綺麗に出るとは限らないので、
それっぽい絵で背景が埋まれば良いという程度の方にしかおすすめできません。
作画の補助として、窓や看板部分に加筆するなどしてご使用いただければと思います。



※以下LT変換はB5誌用原稿用紙に出力しています。

▼設定時に見やすいように色を付けました。


▼上部詳細



▼下部詳細


▼他の角度


▼1階と2階以上にオブジェクトが分かれているので、以下のように1階部分を選択後「編集対象を注視」をクリックすればカメラが寄ります。


▼3D人形を置いて『線幅0.10mm, 検出精度100%』で出力縮小



▼奧にも同じものを配置し、木と地面を加筆


▼1,2,3を並べたもの
屋根の奥側が平面なので、並べて使用する時はお手数ですが修正して下さい…。

▼1~4を並べたもの(手前から4,2,1,3,2)


Material マテリアル

  • default material 初期マテリアル

Configuration 配置

  • default layout 初期レイアウト

Update history

Integrated the 2021/01/24 object into one, and corrected the depth. I changed to be able to watch separately the upper floor and the first floor. 2020/03/19 the top part of the second floor to be easy to use when unnecessary up to the upper set. 2020/03/17 Shop was only part, but I made up to the roof from the window of the top. 2021/01/24 オブジェクトを一つに統合し、奥行きなどを修正。1階と上層階を分けて注視出来るように変更。
2020/03/19 上部まで不要な際使いやすいように2階部分までのものをセットにしました。
2020/03/17 店部分のみでしたが上部の窓から屋根まで作り上げました。

Old version

Content ID:1815811

Published : 3 years ago

Last updated : 2 years ago

horitora's profile Go to profile

アップや無料期間を逃したくない方はTwitterのフォローをお願いします■価格は需要や他素材とのバランス等を鑑み、告知無しに変動します。■ブログにおすすめ素材や価格帯によるまとめ、類似素材の比較、3Dデッサン人形の2人ポーズの合わせかた等、クリスタ関係の便利なトピック等色んなお役立ち記事があるので、是非覗いてみてください!(プロフィールページ→ヘッダー右下のアイコンから)