Action to erase Red draft (赤い下書きを消すアクション) 赤い下書きを消すアクション

Content ID:1802843

  • 224
  • Free
This material can be used in Studio Mode. (What is Studio Mode?)

It is an action to dismiss a red draft usable for a scan image.
Please make a copy of the line drawing to the person such as the main paper, the tone and the coloring digital.

I want to separate the shadow designation and the annotation by drawing on one sheet of paper.
Do not want to use an eraser to prevent tendonitis.
I want to work away from the trace stand and display because the eyes are painful.
Teacher is not able to leave paper work.

It is very useful to you.

Please see the usage example.
スキャン画像に使える赤い下書きを消すアクションです。
線画の清書は紙をメインに、トーンや彩色はデジタルがいいといった人にどうぞ

・影指定・注釈を1枚の紙に描いて分離したい
・腱鞘炎防止に消しゴムを使いたくない。
・目がつらいのでトレース台やディスプレイから離れて作業したい。
・先生が紙作業から離れられない。

といった場合に非常に役に立つと思います。

使い方や注意点は、使用例をご覧ください。

Use
Simply select the layer that the scanned image was drawn on and perform the action.
Use the basic for the scanned images and photos.
 
Attention points
Please do the color correction of the line drawing which I made fair after carrying out the action.
If it is corrected previously, the color of the draft drawn in red becomes strange and the line drawing is difficult to extract.
Do not use colors other than red and black. (The shading can be expressed.)
Blue and green, etc. will be converted to black.
 
 
[Whole sample view]
【 Pixel scale 】
 
[About the image used]
The sample image is a copy of the draft printed in red milli pen (Pigma).
The scanner is imported with the color setting (Epson px1600f).
This image is not, but I also use Canon MG6330 to check the operation.
 
[About the art supplies]
Fair Art Supplies
Pencil, Black ink pen
-Draft Art Supplies
└ Colored Pencil Red (vermilion-leaning is recommended), water-based felt pen, friction red
   
This area is generally fine.
The sample is made from the ease of the draft to the pink of the thin, but there is not a problem in case of a strong pressure in pencil red.
It is recommended to change the color in that case because there is a case to be slightly extracted when becoming purple near which mixes blue.

Just make sure you experiment with your art supplies and your scanner.
The scanners also have different manufacturers and individual differences.

Even if it may go out a little, because there is a case that flies when I corrected the color of the pen after extraction, I think that there is the case not to be anxious.

Can't you do anything but red? ]
The color other than red is not suitable because it mixes easily with black by the nature of the scanner and light.
If the other color is used, the line becomes fat partially at the intersection of the line and the quality falls.
【使い方】
スキャン画像が描画されたレイヤーを選択し、アクションを実行するだけです。
基本はスキャンした画像や写真で取り込んだものに使ってください。
 
【注意点】
清書した線画の色補正はアクションを実行した後に行ってください。
先に補正してしまうと、赤で描いた下書きの色がおかしくなって線画が抽出しにくくなります。
また赤と黒以外の色は使わないでください。(濃淡表現は可能です)
青や緑などは黒に変換されてしまいます。
 
 
【サンプル全体図】
【ピクセル原寸】
 
【使った画像について】
サンプル画像は、下書きを赤で印刷したものにミリペン(ピグマ)で清書したものです。
スキャナはカラー設定(Epson px1600f)で取り込んでます。
この画像ではないですが、動作確認にCanon MG6330も使用してます。
 
【画材について】
・清書画材  
 └ 鉛筆、黒いインクのペン
・下書き画材
 └ 色鉛筆赤(朱色寄りのものをおすすめします)・水性サインペン・フリクションの赤
   
このあたりなら大体大丈夫です。
サンプルは下書きのしやすさから薄めのピンク寄りにしてますが、色鉛筆の赤で筆圧が強い場合でも特に問題はありません。 
 赤でも青の混じった紫寄りになるとうっすら抽出される場合があるので、その場合は色を変えることをおすすめします。

念のため、自分の画材とスキャナで実験してみてください。
スキャナもメーカー差や個体差があります。

 仮に若干出ることがあっても、抽出後のペン画を色補正した際に飛んでしまうケースもあるので、気にならない場合もあると思います。

  【赤以外はできないの?】
赤以外の色はスキャナや光の性質上黒が混ざりやすいため向かないです。
それ以外の色を使うとどうしても線の交差部分で部分的に線が太ってしまい質が落ちてしまいます。
 

Content ID:1802843

Published : 3 years ago

Last updated : 3 years ago

Lilyheart's profile Go to profile

素材はイラストレーター・グラフィッカー向きのもの多めです。 ブラシは画材系、エフェクト系・スタンプ系、グラデセットなど多数気ままにだしてます。 素材は無償から有償になる場合があります。 またアップデートした旧素材はダウンロード防止のため20000CPにするので気を付けてください。※値上げ前にダウンロードした方は追加CPはかかりません。

Other materials by Lilyheart

Popular “Auto Action” materials

New materials