Club-Lights 1 (クラブ-ライト1) クラブ-ライト1

Content ID:1776305

  • 82
  • 1,000 CLIPPY
This material can be used in Studio Mode. (What is Studio Mode?)

Booth sells well.

The floor part of the club was 3D data. Each part is released from this account.
This is a light hanging from the ceiling. Two types of remarking are attached to the truss.
Boothでも販売しています。

クラブのフロア部分を3Dデータにしました。当アカウントからパーツ毎に公開しています。
こちらは天井から吊るすライトです。2種類のムービングライトがトラスに取り付けられています。


You can display only truss.

The outer diameter of the truss is 7m, and the truss top is assumed to be 1.18 m from the upper edge to the light.
The height can be adjusted in pose preset. The distance from the floor to the bottom of the light varies from about 1.6 m to about 8.8 m.

Example of Use
This is an example of the arrangement of 3D data "club-building" which is being published from this account. Please refer to the placement coordinates of the image.

3D data "club-building", "club-Speaker 1", "Club-Speaker 2" published from the account this is a combination of club-Speaker 3, club-Speaker 4, club-subwoofer, club-Light 1, club-Light 2, club-mirror ball, and DJ gear set.

トラスのみの表示もできます。

トラスの外径は7m、トラス上端からライト下端までは1.18mを想定しています。
高さは可動プリセットで調整できます。フロアからライト下端までの距離が約1.6mから約8.8mまで変わる想定です

●使用例
当アカウントから公開中の3Dデータ「クラブ-建物」への配置例です。画像の配置座標を参考にしてください。

当アカウントから公開中の3Dデータ「クラブ-建物」、「クラブ-スピーカー1」、「クラブ-スピーカー2」、「クラブ-スピーカー3」、「クラブ-スピーカー4」、「クラブ-サブウーファー」、「クラブ-ライト1」、「クラブ-ライト2」、「クラブ-ミラーボール」、「DJ機材セット」を組み合わせて人物を配置した画像です。

Material マテリアル

  • default material 初期マテリアル

Configuration. 配置

  • default layout 初期レイアウト
  • Truss only トラスのみ

pose parts 可動パーツ

  • Light 1 (up and down) ライト1(上下)

Content ID:1776305

Published : 4 years ago

Last updated : 1 year ago

23HAL's profile Go to profile

こんにちわ。お役に立つ素材を提供したいと思います。改善が必要な点などがございましたらどうぞお気軽にフィードバックをお寄せください。