When I sketch perspective sketches, I often want to change focus or extend the drawing midway.
Thanks to CSP's model drawing updates, this 3D asset lets you freely create panoramic images,
When you want to switch to a wide or telephoto angle, you don't need to redraw! Just pull up the perspective strength.
Now you can freely draw perspective sketches, change perspectives, and tilt horizontal lines.
You can draw the image you want from any direction, then adjust it to the desired image without redrawing!
If needed, you can also use 3D's own perspective ruler to help you draw perspective lines.
Note
※ This status is as of October 2026. If CSP removes or adds features in the future, the situation may differ.
> recommended for use in the drafting process. After confirming the sketch, you can try extracting colors and reusing the perspective ruler.
> Be sure your version supports "Draw 3D Models" before downloading.
> areas near the edge of the canvas have jagged edges and low resolution, it's normal to rotate them to the center of the canvas.
> grid lines are hand-drawn and not entirely accurate.
> cannot support the fisheye's perspective line.
> can freely draw on 3D and export images, but it cannot be separated from perspective line materials, nor can it create layers or use distortions. (For usage details, you can try drawing on 3D objects first.) )
> this material may consume a lot of power to use, please make sure your computer is running and keep an eye on saving at all times.
Wishing everyone enjoyable perspective drawings!
我在畫透視草圖時常常在中途想要改變焦距或延伸繪製。
多虧於csp的模型繪製更新,這個3d素材可以讓你自由的畫全景圖,
當你想要變成廣角或望遠不需要重新繪製!只要拉動透視強度即可。
現在可以自由自在地繪製透視草圖,並變換視角、傾斜水平線。
你可在任何方向繪製你想要的畫面,最後再調整到你要畫面,不需要重新繪製!
如果你需要,你也可以搭配3D本身的透視尺規,協助你畫出透視直線。
注意
※此為2026年10月的狀況,如未來CSP刪減或增加功能後可能會有不同情況。
>推薦使用在草稿流程上。在確認草圖後,可以試著提取顏色並沿用透視尺規。
>下載前務必確認自己的版本可以使用「繪製3D模型」。
>靠近畫布外圍的部分會有鋸齒跟解析度低的情況是正常的,可以旋轉到畫面中心繪製。
>格線是手繪製的,不完全準確。
>無法支援魚眼的透視線。
>可以自由繪製畫在3D上,並匯出圖片,但無法跟透視線的素材分開,也無法建立圖層或使用變形等。(使用詳情可以先試試在3D物件繪製。)
>這素材很可能在使用上會消耗較多效能,請確認自己的電腦可以運行,並留意隨時存檔。
祝大家透視畫得愉快!
Update history