Swing (double, circular seat and belt seat / with protective frame, movable with chain) (ブランコ(2連・円形座面とベルト座面/保護枠付き・鎖ごと可動)) ブランコ(2連・円形座面とベルト座面/保護枠付き・鎖ごと可動)

Content ID:2296783

  • 2
This material can be used in Studio Mode. (What is Studio Mode?)

It is a double swing with yellow horizontal mounting material received by blue A-shaped legs. On the left is a circular seat suspended by a black belt, and on the right is a belt seat suspended by a yellow chain. The circular seat has four colors of red, green, light blue, and orange edges, and a black net inside. The belt seat surface is a strip with a deflection in the center and is shaped when sitting. The seat surface is one object for each lifting tool, and the origin is on the horizontal mount. If you turn it around the X axis as it is, it will become a natural pendulum with the hanging point as the fulcrum. A protective frame was erected around it to prevent collisions. It is object separate from the swing and is divided into two pieces, front and back. The left and right sides are open so that you can enter and exit. As for the parts, the frame, seat, and protective frame are organized into parents and children, so it should be easy to choose from the list. The origin is the center of the contact patch, the direction of swing is in the Y direction, and the front is in the −Y direction. 黄色い横架材を青いA型の脚で受けた、2連のブランコです。左は黒いベルトで吊った円形の座面、右は黄色い鎖で吊ったベルト座面。円形の座面は縁が赤・緑・水色・橙の4色、中は黒い網です。ベルト座面は中央がたわんだ帯で、座ったときの形になっています。座面は吊り具ごと1つのオブジェクトで、原点が横架材の上にあります。そのままX軸まわりに回せば、吊り点を支点にした自然な振り子になります。まわりにはぶつかり防止の保護枠を立てました。ブランコとは別オブジェクトで、前後2枚に分かれています。左右は出入りできるように開けてあります。部品は架構・座面・保護枠が親子に整理してあるので、一覧から選びやすいはずです。原点は接地面の中心、振れる向きはY方向、正面は−Y方向です。

About this material

It is a set of two swings and a protective frame to prevent collisions.

How to use the gimmick

Pendulum — seat_nest seat_belt has its origin above the transverse mount (hanging point).

Just by turning it around the X axis, you can swing the chain and belt back and forth. The turning angle is the runout angle as it is.

If you knock it down 30 degrees, the picture will be quite vigorous.

object Hierarchy (FBX version)

Parent / Child / Content

Swing / Frame > frame_beam / Yellow horizontal mounting and hanging bracket

Frame > frame_leg_left frame_leg_right / Blue A-shaped legs (including bracing and grounding cap)

seat_nest / Round seat + black suspension belt

seat_belt / Belt bearing surface + yellow chain

Guard / guard_front guard_back / Protective frame (front and rear, 2 sheets)

If you move the parent, the child will follow, but if you choose the child, only the child can be moved.

Best practices

Riding – The circular seat is 450 mm high and the belt seat is 480 mm.

Waiting — Placing a child waiting for their turn outside the protective box creates a park-like space.

Empty swing — Tilt an empty swing just a little to get a picture of just after it's gone.

Tips for LT conversion

Chains and nets have fine lines, so increase the threshold of the contour line.

If you draw the four colors of the edges in different tones, the circular seat will remain even in monochrome.

Specifications

  • Structure Width 3,500 × Height 2,080mm / Ground dimension Approx. 3,240 × 1,700mm
  • Circular seat: outer diameter 1,000mm, height 450mm / belt seat: width 450mm, height 480mm
  • Protective frame 4,200 × 4,000mm, height 800mm (2 front and rear, left and right sides open)
  • Fulcrum: seat_nest seat_belt on the horizontal mount (swings when turned around the X axis)
  • Origin: Center of the contact plane / Direction of swing: Y direction / Front: −Y direction
  • Sample images in 4 directions (front, back, right, left) are included (registration procedure is swing_set_angles.md)
  • Format: FBX (with fulcrum) + OBJ + MTL

この素材について

2連のブランコと、ぶつかり防止の保護枠の一式です。

ギミックの使い方

振り子 — seat_nest seat_belt は原点が横架材の上(吊り点)にあります。

X軸まわりに回すだけで、鎖・ベルトごと前後に振れます。回す角度がそのまま振れ角です。

30度も倒せばかなり勢いのある絵になります。

オブジェクトの階層(FBX版)

親 / 子 / 内容

Swing / Frame > frame_beam / 黄色い横架材と吊り金具

Frame > frame_leg_left frame_leg_right / 青いA型の脚(筋交い・接地キャップ込み)

seat_nest / 円形の座面+黒い吊りベルト

seat_belt / ベルト座面+黄色い鎖

Guard / guard_front guard_back / 保護枠(前後2枚)

親を動かせば子も付いてきますが、子を選べば子だけ動かせます。

おすすめの使い方

乗っている — 円形の座面は高さ450mm、ベルト座面は480mmです。

待っている — 保護枠の外で順番を待つ子を置くと、公園らしい間ができます。

空のブランコ — 誰も乗っていないブランコを少しだけ傾けると、いなくなった直後の絵になります。

LT変換のコツ

鎖と網は線が細かいので、輪郭線の閾値を上げてください。

縁の4色をトーンで描き分けると、モノクロでも円形座面らしさが残ります。

仕様

  • 架構 幅3,500 × 高さ2,080mm/接地寸法 約3,240 × 1,700mm
  • 円形座面 外径1,000mm・高さ450mm/ベルト座面 幅450mm・高さ480mm
  • 保護枠 4,200 × 4,000mm・高さ800mm(前後2枚・左右は開放)
  • 支点:seat_nest seat_belt とも横架材の上(X軸まわりに回すと振れる)
  • 原点:接地面の中心/振れる向き:Y方向/正面:−Y方向
  • 4方向(正面・背面・右・左)の見本画像を同梱(登録手順は swing_set_angles.md)
  • 形式:FBX(支点あり)+ OBJ + MTL

Material マテリアル

  • default material 初期マテリアル

Configuration 配置

  • default layout 初期レイアウト

Angle アングル

  • Front 正面
  • The backside 背面
  • Right
  • Left

Content ID:2296783

Published : 6 hours ago

Last updated : 6 hours ago

gemini.A's profile Go to profile

興味をもっていただきありがとうございます! 私は漫画家をやっています。漫画で利用する素材などをBlenderを使って作成しています。たくさんアップしますのでフォローお願いします。あと要望ありましたら検討しますのでダイレクトメッセージください。

Other materials by gemini.A

Popular “3D object” materials

New materials