Bathroom 3D Material Set [Suitable for manga] (浴室3D素材セット【漫画向き】) 浴室3D素材セット【漫画向き】
Content ID:2097674
-
419
This is a 3D material set that can be used when drawing a bathroom scene in a cartoon. Although it is simple, it also comes with a dressing room.
Added water surface!
漫画で浴室のシーンを描くときに使える3D素材セットです。簡易ではありますが脱衣所も付属します。
水面を追加しました!
〇 Overview and characteristics of the material
With this, it is assumed that you can extract line drawings and textures (EX only) and add them by hand as needed, or use them as drafts or edges.
If you use it with Pro, you can use it as a per.
〇 Flow of use and examples of use
Depending on the angle and position, extra lines may appear, so erase unnecessary parts with an eraser.
You can draw it, combine parts, remove unnecessary lines, apply tones, and make various adjustments.
The sense of size is as follows.
〇 Composition of materials
The object configuration looks like this:
〇 Convenient usage
・ About line drawing of 3D materials (EX only)
After adjusting the angle of the 3D material, you can make a line drawing with [Layer] → [Layer LT conversion].
Please note that CLIP STUDIO Pro does not have this lineart extraction feature.
・About materials
For this material, we have set a color-coded pattern of the parts and a material that all parts are made of pure white.
Please use it according to the purpose.
You can change the material from the [sub tool detail] → [object] → [Layout] column (the first tab from the left).
・ About movable settings
This material has a movable setting for the door to the bathroom.
If Door 1 and Door 2 are set to the same value, they can be opened and closed approximately.
Since it is a type of door where the two are linked, I think it will need to be fine-tuned a little.
Even if this setting is not set, those that are divided (object separated) can be moved in position.
〇Update details (2024/07/08)
We corrected the material position, adjusted the thumbnail, and added water surface parts.
〇素材の概要・特徴
これで線画やテクスチャを抽出(EXのみ)して、必要に応じて手で描き足す、もしくは下書きやあたりとして使うというような使い方を想定しています。
Proで使う場合はあたりとしてご利用いただけます。
〇使用の流れと使用例
角度や位置によっては余分な線が出てしまうことがあるので、不要な部分は消しゴムで消してください。
描きたしたり、パーツを組み合わせたり、不要な線を消したり、トーンを貼ったりして、いろいろ調整することでさらにそれっぽくなります。
サイズ感は以下のような感じです。
〇素材の構成
オブジェクト構成は以下のような感じです。
〇便利な使い方
・3D素材の線画化について(EXのみ)
3D素材の角度等を調整し終えたら、[レイヤー]→[レイヤーLT変換]で線画化できます。
クリスタProにはこの線画抽出の機能がないので注意してください。
・マテリアルについて
本素材には、パーツの色分けパターンと、すべてのパーツを真っ白で作ったもののマテリアルを設定しています。
用途に応じてご利用ください。
マテリアルは[サブツール詳細]→[オブジェクト]→[レイアウト]欄(左から1つ目のタブ)より変更できます。
・可動設定について
本素材には、浴室への扉部分に可動設定をしてあります。
ドア1とドア2をそれぞれ同じ数値にするとだいたいの開閉が可能です。
2つが連動するタイプの扉なので、少し微調整が必要になるかと思います。
この設定がされていなくても、パーツ分け(オブジェクト分け)されているものは位置を動かすことができます。
〇アップデート内容(2024/07/08)
素材位置の修正やサムネイルの調整、水面パーツの追加を行いました。
material マテリアル
-
Pattern 1 パターン1
-
pure white 真っ白
-
Pattern 2 パターン2
-
Pattern 3 パターン3
arrangement 配置
-
2 sides + door かべ2面+扉
-
No dressing room 脱衣所なし
-
Show all 全表示
pose parts 可動パーツ
-
Door 1 ドア1
-
Door 2 ドア2
Update history
2024/05/25 Material has been released.
2024/07/08 The material has been updated and the price has been raised to 150CP.
2024/05/25 素材を公開しました。
2024/07/08 素材をアップデートし、150CPへ値上げしました。
Old version