3D Car Set [Suitable for Manga] Ver1.2 (3D車セット【漫画向き】Ver1.2) 3D車セット【漫画向き】Ver1.2
Content ID:2094392
-
84
It is a 3D material that is a set of cars.
The interior is also made, so it is useful in scenes such as driving. Please see the overview section for details!
車一式セットになった3D素材です。
内装も作ってあるので、ドライブなどのシーンで活躍します。詳細は概要欄をどうぞ!
〇 Overview and characteristics of the material
It is assumed that you can extract line drawings and textures with this material (EX only) and add them by hand as needed, or use them as drafts or edges.
If you use it with Pro, you can use it as a per.
〇 Flow of use and examples of use
Depending on the angle and position, extra lines may appear, so erase unnecessary parts with an eraser.
You can draw it, combine parts, remove unnecessary lines, apply tones, and make various adjustments.
〇 Composition of materials
The object configuration looks like this:
* I did not create the belt part of the seat belt because it seems easier to add it.
〇 Convenient usage
・ About line drawing of 3D materials (EX only)
After adjusting the angle of the 3D material, you can make a line drawing with [Layer] → [Layer LT Conversion].
Please note that CLIP STUDIO Pro does not have this lineart extraction feature.
・About materials
There are a total of five materials for this material: four color-coded patterns for the parts and one made of pure white for all parts.
Please use it according to the purpose.
You can change the material from the [sub tool detail] → [object] → [Layout] column (the first tab from the left).
・Layout
The parts display that seems to be used in many situations, such as whether or not the window is displayed and the seat only is displayed, is registered.
Since the overall number of parts is large, I think you can save time by applying a layout close to the image and then fine-tuning it.
You can change the layout from the [sub tool detail] → [object] → [Layout] column (second tab from the left).
・ About movable settings
The doors and wipers of this material are set to move numerically.
Move the lever from the [sub tool detail] → [object] → [Layout] column (third tab from the left).
* This "movable setting" is a setting to express movement with numerical angles!
Even if this setting is not set, those that are divided (object separated) can be moved in position.
〇 Update contents (2024/06/24)
Minor fixes such as thumbnail settings have been made.
There are no major changes to the material content or functionality.
〇素材の概要・特徴
本素材で線画やテクスチャを抽出(EXのみ)して、必要に応じて手で描き足す、もしくは下書きやあたりとして使うというような使い方を想定しています。
Proで使う場合はあたりとしてご利用いただけます。
〇使用の流れと使用例
角度や位置によっては余分な線が出てしまうことがあるので、不要な部分は消しゴムで消してください。
描きたしたり、パーツを組み合わせたり、不要な線を消したり、トーンを貼ったりして、いろいろ調整することでさらにそれっぽくなります。
〇素材の構成
オブジェクト構成は以下のような感じです。
※シートベルトのベルト部分は描き足す方が楽そうなので作成していません。
〇便利な使い方
・3D素材の線画化について(EXのみ)
3D素材の角度等を調整し終えたら、[レイヤー]→[レイヤーLT変換]で線画化できます。
クリスタProにはこの線画抽出の機能がないので注意してください。
・マテリアルについて
本素材には、パーツの色分けパターン4つと、すべてのパーツを真っ白で作ったもの、計5つのマテリアルを設定しています。
用途に応じてご利用ください。
マテリアルは[サブツール詳細]→[オブジェクト]→[レイアウト]欄(左から1つ目のタブ)より変更できます。
・レイアウトについて
窓の表示有無や座席のみ表示など、使う場面が多そうなパーツ表示を登録してあります。
全体のパーツ数が多いので、イメージに近いレイアウトを適用してから微調整すると時短できると思います。
レイアウトは[サブツール詳細]→[オブジェクト]→[レイアウト]欄(左から2つ目のタブ)より変更できます。
・可動設定について
本素材の扉やワイパーに、数値による可動の設定をしています。
[サブツール詳細]→[オブジェクト]→[レイアウト]欄(左から3つ目のタブ)から、レバーを動かして使用してください。
※この「可動設定」は数値で角度をつけた動きを表現するための設定です!
この設定がされていなくても、パーツ分け(オブジェクト分け)されているものは位置を動かすことができます。
〇アップデート内容(2024/06/24)
サムネイルの設定など軽微な修正を行いました。
素材内容や機能性について大きな変更はありません。
material マテリアル
-
In the body ボディ中
-
Brighter body ボディ明るめ
-
Body darkening ボディ暗め
-
pure white 真っ白
-
Body white ボディ白
arrangement 配置
-
No window 窓なし
-
With window 窓あり
-
Only the interior around the driver's seat 運転席まわりの内装のみ
-
Rear seats only 後部座席のみ
pose parts 可動パーツ
-
In front of the door L ドア前L
-
In front of the door R ドア前R
-
Wiper Part 2 ワイパーパーツ2
-
Wiper Part 1 ワイパーパーツ1
-
Rear door L 後方ドアL
-
Rear Door R 後方ドアR
-
Trunk door トランクドア
-
Parking brake bar パーキングブレーキバー
-
bonnet ボンネット
Update history
2024/06/02 Price has been raised.
2024/06/24 Updated to Ver1.2 (thumbnail settings and other minor fixes. )
2024/06/02 値上げしました。
2024/06/24 Ver1.2へアップデート(サムネイルの設定など軽微な修正を行いました。)
Old version