* This material is a material that adds an additional part to the "temple" of the content ID2086691. You can also display the temple before expansion by switching the display.
* When using it as a Japanese building, it includes parts that are no longer used after the Kamakura period, so please use it as a building built before that.
The two gates in front and the doors and windows of the temple and the extension are pose parts. It can be opened and closed on the left and right at once from the arrangement (including opening and closing of the spear).
Since the roof and shed parts are separated, it is easy to create an impressive scene where you can get a bird's-eye view of the inside of the building from the top of the beams and girders by hiding the roof.
The handle for winding wells can be rotated manually.
The water trough and the part of the rope connected to the tub are separate parts.
The design of folk utensils and accessories is based on Chinese ones.
It is a material with a large number of parts.
By default, the fixtures inside the building are hidden.
The layout including the exterior and interior is registered respectively, so please switch the display before use.
* Those with a mark in the ★ part name are parts with multiple patterns. Display one of them depending on the scene. By default, uneven parts for medium and near views are displayed.
・Temple Wall 2: Before and after expansion
・Foundation of the temple: Before and after expansion
The above parts are registered according to the display in the arrangement.
・ The foundation of the temple Cobblestones, flat planes The arrangement shows the cobblestones. If necessary, manually display the planar part.
・ If the winding part of the rope of the well is high and low When the view is high, if the rope part is crushed black, manually switch to the low part.
"Expansion_Night/Rainy" is registered in the layout. Hide the whistles for drying dry food in bulk.
Changes in time and climate can be easily expressed with small items.
LT conversion detection accuracy: 70-60
* In addition to lowering the detection accuracy, the accuracy can be adjusted according to the size of the scene and the depth function is used.
Material composition
※本素材は、コンテンツID2086691の『寺院』に増設部分を加えた素材です。表示の切替えで増設前の寺院の表示もできます。
※日本の建物として利用する場合は、鎌倉時代以降は使われなくなったパーツをモチーフにしたものを含みますので、それ以前に建てられた建物としてご使用ください。
正面の2か所の門と、寺、増設部の扉と窓は可動パーツになっています。配置から左右一括で開閉ができます（閂の開閉含む）。
屋根と小屋組みパーツを分けているので、屋根を非表示にすると梁や桁の上から建物内部を俯瞰する印象的なシーンが簡単に作れます。
井戸の巻取り用の把手は手動で回転できます。
水くみ桶と桶に繋がる縄の部分はそれぞれ別パーツになっています。
民具や小物等のデザインは中国のものを参考にしています。
パーツ数が多い素材になっています。
初期状態では建物内部の備品は非表示になっています。
外観用と内装を含む配置をアングルをそれぞれ登録していますので、ご使用前に表示の切替をしてご確認をお願いします。
※パーツ名に★マークがあるものは、複数のパターンがあるパーツです。シーンに応じて片方を表示させてください。初期設定では中、近景用の凹凸のあるパーツが表示されます。
・寺の壁2 増設前、後
・寺の基礎 増設前、後
上記のパーツは配置に表示に応じた登録をしています。
・寺の基礎 石畳、平面 配置では石畳を表示しています。必要な場合は手動で平面パーツを表示させてください。
・井戸の縄の巻取り部分 high、low 遠景になると、縄の部分が黒く潰れていしまう場合は手動でlowパーツに切替てください。
配置に、『増設_夜間・雨天』を登録しています。乾物を干すための笊を一括で非表示にします。
時間や気候の変化を小物で簡単に表現できるようになっています。
LT変換 検出精度：70〜60
※検出精度を低くする他に、シーンの大きさで精度を調整機能や、奥行き機能を利用しています。
素材構成
Material マテリアル
-
default material 初期マテリアル
Place 配置
-
増設_外 02_2:非表示 増設_外 02_2：非表示
-
Expansion_Outside 01_1.1: Open 増設_外 01_1.1：開
-
Expansion_Outside 01_1.2: Open 増設_外 01_1.2：開
-
Expansion_outside 01_1.1,2: Open 増設_外 01_1.1,2：開
-
Expansion_02_1.1 03_1.1: Open 増設_02_1.1 03_1.1：開
-
Expansion_01,02,03_1.1: Open 増設_01,02,03_1.1：開
-
Expansion_Nighttime and rainy weather 増設_夜間・雨天
-
増set_02,03_1.1 closed,2 indicated 増設_02,03_1.1 閉,2表示
-
Temple_Outer 02_2: Hidden 寺_外 02_2：非表示
-
Temple_外 01_1.1:Kai 寺_外 01_1.1：開
-
Temple_外 01_1.2:Kai 寺_外 01_1.2：開
-
Temple_外 01_1.1,2: Open 寺_外 01_1.1,2：開
-
Temple_02_1.1: Opening 寺_02_1.1：開
-
Temple_01_1.1 02_1.1: Open 寺_01_1.1 02_1.1：開
-
Temple_02_1.1: Closed 02_2: Indicates 寺_02_1.1：閉 02_2：表示
Angle アングル
-
In front of the main gate 正門前
-
Universal door front 通用門前
-
Side 1 側面 1
-
Side 2 側面 2
-
domestic 境内
-
Garden front view 庭正面
-
back 背面
-
Garden back 庭 背面
-
Temple interior front 寺内装 前面
-
Temple interior side 1 寺内装 側面1
-
Temple interior side 2 寺内装 側面2
-
Temple interior back 寺内装 背面
-
Interior Rear 内装 背面
-
Interior Side 内装 側面
-
Top 上面
pose parts 可動パーツ
-
01_1 01_1.門扉 R
-
01_1. Door L 01_1.門扉 L
-
01_1.門扉_閂 bolt 01_1.門扉_閂 bolt
-
01_2. Door R 01_2.門扉 R
-
01_2. Door L 01_2.門扉 L
-
01_2.門扉_閂 bolt 01_2.門扉_閂 bolt
-
02_1.1.扉 R 02_1.1.扉 R
-
02_1.1. Title L 02_1.1.扉 L
-
02_1.1.閂 R 02_1.1.閂 R
-
02_1.1.閂 L 02_1.1.閂 L
-
03_1.1.扉 R 03_1.1.扉 R
-
03_1.1. Title L 03_1.1.扉 L
-
03_1.1.閂 bolt 03_1.1.閂 bolt
-
03_1.1.窓L 1-2 03_1.1.窓L 1-2
-
03_1.1.窓L 1-1 03_1.1.窓L 1-1
-
03_1.1.窓L 2-2 03_1.1.窓L 2-2
-
03_1.1.窓L 2-1 03_1.1.窓L 2-1
-
03_1.1.windows R 03_1.1.窓R
Other materials by 笹あつむ
Popular “3D object” materials
New materials
Badges
-
MVP ◆This user has contributed greatly to the management of the community, by posting many great responses to the questions asked. Once every three months, MVPs are determined based on the points earned during that period and will be recognized accordingly. -
New Valuable Player (NVP) ◆These are the next-best contributors to the community after MVPs. This is awarded to users who have not yet won an MVP award, based on the number of points they have earned. -
Official Expert ◆Chosen out of all MVP awardees, who are already proof of excellence, this is a testimony of outstanding correspondence in the community. After careful screening, they are appointed by CELSYS and assume their position.Note: Formally called “Evangelists” -
Official Moderator of CELSYS ◆Moderators are official CELSYS staff members who are fluent in Japanese as well as various other languages. Moderators are not experts on the software or illustration, so they are not able to directly answer your questions. However, moderators provide communication and language support to ensure that everyone can smoothly communicate with each other. -
CELSYS official accountThe Official Administrator Account