Pairing with case (Hiraichi princess cut) (ケース付きペアリング(平打ち・プリンセスカット)) ケース付きペアリング(平打ち・プリンセスカット)

Content ID:1983347

  • 140
  • 1,000 CLIPPY
This material can be used in Studio Mode. (What is Studio Mode?)

Hiraichi ring with 5mm width 16
Case for pairing
3.5 mm Width 12
2mm width 7 (with diamond)
Was added.

Each ring is a separate item that you can move freely.

The case is divided in the upper half and the lower half, and is open about 50 degrees by moving the movable object slide.

The diamond which I fastened to a ring of 2mm width to the silhouette of the rings was a princess cut, and the case was made a straight-line design.

Display and hide the object, including the case alone, one Ring,
7mm width + 3.5 mm width pair
7mm width + 2mm width with stone pair
3.5 mm width + 2mm width with stone pair
You can put a variation in the combination and.
5mm幅16号の平打ちの指輪に
・ペアリング用ケース
・3.5mm幅12号
・2mm幅7号(ダイアモンド付き)
を加えました。

指輪はそれぞれ個別のアイテムになっており、自由に動かすことができます。

ケースは上半分と下半分が分かれていて、「可動オブジェクト」のスライドを動かすことで50度ほど開いた状態になります。

リングのシルエットに合わせて2mm幅の指輪に留めたダイアモンドはプリンセスカットに、ケースも直線的なデザインにしてみました。

オブジェクトの表示・非表示でケース単体、指輪一本ずつをはじめ、
7mm幅+3.5mm幅のペア
7mm幅+2mm幅石付きのペア
3.5mm幅+2mm幅石付きのペア
と組み合わせにバリエーションを出すことができます。


I ategatta the 5mm width (left) and 2mm width (right) of the drawing doll ↓


This is a 5mm width ring that I uploaded first.

It is a feeling of size like this when I give it to a drawing doll ↓



デッサン人形に5mm幅(左)と2mm幅(右)をあてがった様子↓


こちらは最初にアップロードしていた5mm幅の指輪です↓

デッサン人形に持たせるとこちらのようなサイズ感です↓


Material マテリアル

  • default material 初期マテリアル

disposition 配置

  • default layout 初期レイアウト
  • 2mm3.5mm 2mm3.5mm
  • 2mm5mm 2mm5mm
  • 2mm3.5mm5mm 2mm3.5mm5mm

pose parts 可動パーツ

  • casetop casetop

Update history

2023/2/16 pairing case and 3.5 mm width ring, 2mm width ring (with diamond) were updated. 2023/2/16 ペアリングケースと3.5mm幅の指輪・2mm幅の指輪(ダイアモンド付き)を更新しました。

Old version

Content ID:1983347

Published : 2 years ago

Last updated : 2 years ago

a.kred's profile Go to profile

クリップスタジオ・クリップスタジオEXで使う3Dモデルをアップロードしています。 装飾品関係が多く、モデルは全て原寸大で制作しています。 A4原稿(600dpi)での使用を想定した素材が中心です。 解像度の低いデータに使用する場合には、大きいサイズでLT変換した後に縮小するときれいに仕上がります。 宝石の研磨面はLT変換の際に「検出精度」の数字を大きくするとはっきり出ます。