Club-Speaker 4 (クラブ-スピーカー4) クラブ-スピーカー4

Content ID:1776300

  • 27
  • 500 CLIPPY
This material can be used in Studio Mode. (What is Studio Mode?)

Booth sells well.

The floor part of the club was 3D data. Each part is released from this account. This is a speaker lined with two hanging from the ceiling. It is set left and right.
Boothでも販売しています。

クラブのフロア部分を3Dデータにしました。当アカウントからパーツ毎に公開しています。こちらは天井から吊り下げる2機並んだスピーカーです。左右セットです。


Two machines are attached to the truss with a 22.5 degree diagonal from the x-axis. The truss length is 5.72 m, 1.69 m from the top of the truss to the lower end of the speaker.

You can adjust the height by selecting pose preset. The distance from the floor to the bottom of the speaker varies from about 1.6 m to about 7.1 m.


Example of Use
This is an example of the arrangement of 3D data "club-building" which is being published from this account. Please refer to the placement coordinates of the image.

3D data "club-building", "club-Speaker 1", "Club-Speaker 2" published from the account this is a combination of club-Speaker 3, club-Speaker 4, club-subwoofer, club-Light 1, club-Light 2, club-mirror ball, and DJ gear set.

X軸から22.5度斜めのトラスに2機づつ取り付けられています。トラスの長さは5.72m、トラス上端からスピーカー下端まで1.69mを想定しています。

高さは可動プリセットを選んで調整できます。フロアからスピーカー下端までの距離が約1.6mから約7.1mまで変わる想定です。


●使用例
当アカウントから公開中の3Dデータ「クラブ-建物」への配置例です。画像の配置座標を参考にしてください。

当アカウントから公開中の3Dデータ「クラブ-建物」、「クラブ-スピーカー1」、「クラブ-スピーカー2」、「クラブ-スピーカー3」、「クラブ-スピーカー4」、「クラブ-サブウーファー」、「クラブ-ライト1」、「クラブ-ライト2」、「クラブ-ミラーボール」、「DJ機材セット」を組み合わせて人物を配置した画像です。

Material マテリアル

  • default material 初期マテリアル

Configuration. 配置

  • default layout 初期レイアウト
  • Right only 右のみ
  • Left only 左のみ

pose parts 可動パーツ

  • Speaker 4 (up and down) スピーカ4(上下)

Content ID:1776300

Published : 4 years ago

Last updated : 1 year ago

23HAL's profile Go to profile

こんにちわ。お役に立つ素材を提供したいと思います。改善が必要な点などがございましたらどうぞお気軽にフィードバックをお寄せください。