Club-Speaker 2 (クラブ-スピーカー2) クラブ-スピーカー2

Content ID:1776297

  • 30
  • 500 CLIPPY
This material can be used in Studio Mode. (What is Studio Mode?)

Booth sells well.

In the price cut! The floor part of the club was 3D data. Each part is released from this account. This is a speaker lined with six hanging from the ceiling.
Boothでも販売しています。

値下げ中! クラブのフロア部分を3Dデータにしました。当アカウントからパーツ毎に公開しています。こちらは天井から吊り下げる6機並んだスピーカーです。


This is a speaker with six attached to the X-directional truss. The truss length is 14.43 m, 1.69 m from the top of the truss to the lower end of the speaker. The height can be adjusted in pose preset. The distance from the floor to the bottom of the speaker varies from about 1.6 m to about 7.1 m.

Example of Use
This is an example of the arrangement of 3D data "club-building" which is being published from this account. Please refer to the placement coordinates of the image.


3D data "club-building", "club-Speaker 1", "Club-Speaker 2" published from the account this is a combination of club-Speaker 3, club-Speaker 4, club-subwoofer, club-Light 1, club-Light 2, club-mirror ball, and DJ gear set.

X方向のトラスに6機取り付けられたスピーカーです。トラスの長さは14.43m、トラス上端からスピーカー下端まで1.69mを想定しています。高さは可動プリセットで調整できます。フロアからスピーカー下端までの距離が約1.6mから約7.1mまで変わる想定です。

●使用例
当アカウントから公開中の3Dデータ「クラブ-建物」への配置例です。画像の配置座標を参考にしてください。


当アカウントから公開中の3Dデータ「クラブ-建物」、「クラブ-スピーカー1」、「クラブ-スピーカー2」、「クラブ-スピーカー3」、「クラブ-スピーカー4」、「クラブ-サブウーファー」、「クラブ-ライト1」、「クラブ-ライト2」、「クラブ-ミラーボール」、「DJ機材セット」を組み合わせて人物を配置した画像です。

Material マテリアル

  • default material 初期マテリアル

Configuration. 配置

  • default layout 初期レイアウト

pose parts 可動パーツ

  • Speaker 2 (up and down) スピーカ2(上下)

Content ID:1776297

Published : 4 years ago

Last updated : 1 year ago

23HAL's profile Go to profile

こんにちわ。お役に立つ素材を提供したいと思います。改善が必要な点などがございましたらどうぞお気軽にフィードバックをお寄せください。