You can draw LINE stickers together and output them at once! Set of ten Pre & action (LINEスタンプをまとめて描けて一気に出力できる!テンプレ&アクションのセット) LINEスタンプをまとめて描けて一気に出力できる!テンプレ&アクションのセット

Content ID:1754749

  • 777
This material collection includes materials that can be used in Studio Mode. (What is Studio Mode?)

LINE Stamp Main, tab, the stamp 40 pieces
template draw on a single file
It is a file of the Kakidaseru auto action in the PNG image for application together.
The size of the base must be in the width 1670 × height 4400px resolution 350 (or 600) dpi!

We have exhibited only ten pre auto action.
LINEスタンプmain、tab、スタンプ40個を
一つのファイル上で描けるテンプレートと
申請用png画像にまとめてかきだせるオートアクションのファイルです。
ベースのサイズは必ず幅1670×高さ4400px 解像度350(または600)dpiでおねがいいたします!

オートアクション無のテンプレのみも出品しております。

※ PRO version/EX version is compatible with both.

LINE Stamp Main, tab, 40 pieces
template draw on a single file
It is a file containing Kakidaseru auto action in PNG image together.
The stamp 40 is with a mask of 10px square



[Flow of Creation]
① ★ Draw Illustrations to LINEstamptemple.clip. Draw in the ★ Drawing folder
Load the ② ★ auto action File auto action.
PRO version ⇒ PRO version of the LINE Stamp Export auto action
For EX version ⇒ LINE Stamp Export auto action
Select and execute auto action loaded in ③ ②
Auto export image.
The Save screen is 42 times. (Main, tab, 40 stamps picture minutes)
Please save the following name in order.
The order of saving is
main.png
tab.png
01.png
02.png
・・・03.png、04.png・・・
40.png's in order.
※ If you want to stop in the middle, press the stop mark ■ to stop.
★ If you have a picture set of stickers beforehand, please prepare
It is easy to overwrite them in order!

[About material]
★ LINEstamptem.clip
(Main image) Horizontal 240px vertical 240px no margin 1 piece
(Talk room tab image) Horizontal 96px vertical 74px no margin 1 piece
(Stamp image) Horizontal 370px vertical 320px margin 10px 40 pieces
Resolution 350DPI
Please draw the illustration in the ★ drawing folder.
The pen which draws is attached to the circumference □ and cannot write! If you
View > snap to ruler
View > snap to special ruler
Please uncheck the Will no longer be snapped.

[42 files after export]
Put it in one folder in a zip file.
※ You can up to a dash by selecting the zip on the LINE site.

【! Note 】
● "Export at once" after playing, please do not save the LINEstamptemple.clip.
This is because the resolution in the action has been converted to 350dpi → 72dpi.
About the margin of the stamp illustration
01.png ~ 40.png stamp image is written in the margin 10px the horizontal 370px vertical 320px.
So, for example, if there is a short vertical illustration, the LINE will be between the top and bottom.

So it is better to cut the upper and lower margins individually. * To reduce the size (even ↓)! ※ It is repelled to the LINE site at the time of up.

◯ W350 X H310 × W349 X H299


※PRO版/EX版両方対応しています。

LINEスタンプmain、tab、40個を
一つのファイル上で描けるテンプレートと
png画像にまとめてかきだせるオートアクション入りファイルです。
スタンプ40個には10px四方のマスク付き



【作成の流れ】
①★LINEstamptemple.clipにイラストを描きます。「★描画フォルダ」内に描いてください
②★オートアクションファイルをオートアクションに読み込んでください。
   PRO版の方⇒ PRO対応版LINEスタンプ用書き出しオートアクション 
   EX版の方⇒ LINEスタンプ書き出しオートアクション
③②で読み込んだオートアクションを選択・実行して
 画像を自動書き出しします。
 保存画面が42回でます。(main,tab,40スタンプ画像分)
 順番に下記の名前をつけて保存してください。
 保存の順番ですが
 main.png
 tab.png
 01.png
 02.png
 ・・・03.png、04.png・・・
 40.png の順番です。
 ※途中で止めたい場合は停止マーク■を押して止めてください。
★あらかじめスタンプの画像セットがあれば準備していただいて
 そこに順番に上書きしていくとラクです!

【素材について】
★LINEstamptem.clip
(メイン画像)横240px 縦240px 余白無し 1個
(トークルームタブ画像)横96px 縦74px 余白無し 1個
(スタンプ画像)横370px 縦320px 余白有10px 40個
解像度350dpi
イラストは「★描画フォルダ」内に描いてください
※描くペンが周りの□にくっついて書けない!といった場合
 表示>定規にスナップ
 表示>特殊定規にスナップ
 のチェックを外してください。スナップされなくなります。

【42ファイルの書き出しが終わったら】
1つのフォルダに入れてzipファイルにします。
※LINEサイトでzipを選択することで一気にアップができます。

【!注意!】
●「一気に書き出し」再生後は、LINEstamptemple.clipを保存しないようにしてください。
 アクションで解像度が350dpi→72dpiに変換されているためです。
●スタンプイラストの余白について
01.png~40.png のスタンプ画像は横370px縦320pxで余白10px有で書きだします。
そのため、例えば縦が短いイラストがある場合、LINE上では上下の間が出ることになります。

ですので、上下の余白は個別に切り取ったほうが良いです。※サイズを小さくする時は(偶数↓)になるように!※LINEサイトへアップ時にはじかれます。

 ◯ W350 X H310 × W349 X H299


Support for creating LINE stickers LINEスタンプ作成支援

Update history

2022/9/29 appended One place in the procedure in the explanatory image, I have been listed in the wrong. ※ The correction of the image has been completed. We would like to thank the customer who contacted us. Updated 2020/1/27 update version. I have added a auto action for PRO to be available to those who ★ PRO version!  If you are using the Pro Pro version auto action  Please use the "Export auto action for PRO compatible version LINE stamp". Since we have updated a little more ★ EX version,  Please use "LINE Stamp export auto action". 2022/9/29追記
説明画像の中の手順で1カ所、間違った記載をしておりました。
※画像の修正は完了しております。ご連絡をいただきましたユーザーさま感謝申し上げます。

2020/1/27更新版 アップデートしました。
★PRO版の方にもご利用いただけるようPRO用のオートアクションを追加いたしました!
 PROをお使いの方はPRO版とついたオートアクション
 「PRO対応版LINEスタンプ用書き出しオートアクション」をご利用くださいませ。

★EX版の方も少し更新いたしましたので、
 「LINEスタンプ書き出しオートアクション」をご利用くださいませ。

Content ID:1754749

Published : 4 years ago

Last updated : 1 year ago

ちあきみ's profile Go to profile

デザイナー/イラストレータのちあきみです。 よろしくお願いいたします。 ▼LINEスタンプ販売中です!伊予弁、みきゃんスタンプなど https://store.line.me/stickershop/author/1912/ja こんなテンプレートが欲しいなどありましたらご連絡くださいませ(ˊωˋ*) 作れそうだったら作成いたします!

Other materials by ちあきみ

Popular “Material catalog” materials

New materials