After extracting the zip file, please read and use the jitensya_pd .LWS.
After loading, first select the stopper (installation), (release), the selection of the light (off), the option of the key (open), and the (Close) option.
Next, after selecting the pedal axis, rotate the pedal to the desired position. After that, please choose the angle of the pedal (right) from six stages.
The upper and lower parts of the saddle can be adjusted at the same time after the saddle and saddle fittings are selected while holding down the Shift key, and moving (up and down) to adjust the height and nudge (left and right), but it takes a little effort.
Move (up and down) 0.6 move (left and right) I'd go up a little bit at about 0.1.
I wanted to be able to rotate the handle to the left and right, but the central axis and the relationship between the file capacity is slightly tilted, this time I decided to be up separately in the steering wheel rotation specification and pedal rotation. The person who can handle the 3D software seems to be advantageous if I have you rotate the steering wheel there.
Zipファイル解凍後、jitensya_pd.lwsを読み込んでご使用下さい。
読み込み後、最初にストッパー(設置)、(解除)の選択、ライト(消灯)、(点灯)の選択、鍵(開ける)、(閉める)の選択をして下さい。
次にペダル軸を選択後、回転(左右)でペダルを好みの位置まで回転させて下さい。その後でペダル(右)(左)の角度を6段階からお選び下さい。
サドルの上下はShiftキーを押しながらサドルとサドル金具を同時に選択後、移動(上下)で高さを調整し移動(左右)で微調整が可能ですが、少し手間がかかります。
移動(上下)0.6移動(左右)0.1程度で少し上に上がると思います。
ハンドルも左右に回転出来るようにしたかったのですが、ファイル容量との関係と中心軸が若干傾いてる為、今回はペダル回転仕様とハンドル回転仕様に分けてアップする事にしました。3Dソフトを扱える方はそちらでハンドルを回転して頂くとお得かと思われます。