グレースケールスイッチ v.1 [古い] (Greyscale Switch v.1 [OUTDATED]) Greyscale Switch v.1 [OUTDATED]
コンテンツID:1768770
-
1,447
手間をかからなす、基本的なオートアクション:グレースケールスイッチ。あなたの価値チェックのニーズに最適! Hassle-Free, Basic Auto-action: Greyscale Switch. Perfect for your Value checking needs!
このイラストがまだ平らではなく、すべてのレイヤーがまだそこにあると想像してください。
グレースケールスイッチは、すべてのレイヤーを平らにしません、それはあなたのレイヤーやエフェクトのいずれかを変更しません。 グレースケールバージョンを表示する修正レイヤーのみが作成されます。
- [レイヤー] タブ> [色相/彩度/輝度] >新しい補正レイヤー> > [レイヤー] タブに移動します。
- 「-100」に彩度レベルを下げる
- [OK] をクリックします
色合いと輝度が変更されていないことがわかります(すべて0のまま)、つまりこの グレースケールスイッチはあなたの色のアートに忠実です。
- メニュー タブに移動> レイヤー > 新しいレイヤー>塗りつぶし
- 黒または16進数#000000の黒を選ぶ(純粋な黒を使用すると、グレースケールプレビューを作成するのに最適な色です)
- 描画モードを [色相 ]または [色]に設定します
- 常にすべてのレイヤーの上にこの塗りつぶしレイヤーを維持
- ヴォイラ!
- [ マスクレイヤ: OFF ] : 補正レイヤーにマスクレイヤーがありません。この自動操作を使用すると、 グレースケールスイッチは、すべての灰色を表示します!
- [ マスクレイヤー: ON ] : 補正レイヤーを作成するときに作成したマスクレイヤーを保持します。アートのどの部分が灰色に見えるかを編集することができます。
大事な
- グレースケールスイッチの両方のセットは、自動的にすべてのレイヤー のTOPに補正レイヤー(グレースケールプレビューを作成しているもの) を配置します。 私はあなたが他のレイヤーをグレースケールにする必要がない場合に備えて、これを言及しています。
- グレースケールスイッチがオンのときにアートワークとして書き出し/保存できます。あなたがそれを必要とする場合。(あなたの好みの画像形式に)としてエクスポートするか、名前を付けて保存してください。
- グレースケールスイッチセットは、もともと英語です。 したがって、グレースケールスイッチレイヤーの名前を変更するには、以下の手順を実行します。
- 自動操作ウィンドウに移動する
- グレースケールスイッチを開く(ボタンモードを「オン」にした場合はオフにします)
- click the arrow pointing to the set name, and dinffind the "Change Layer Name" command
- 四角いボックスをクリックすると、それはそれです!
オートクティオンセットをアクティブ/再生するたびに、グレースケールスイッチで名前を変更するよう求める情報が表示されます。しかし、その自動名前変更は非常に面倒なので、両方のアクションセットの補正レイヤーにレイヤーパレットの色(16進数#595959)を設定して、修正レイヤーの名前を変更するのが面倒な場合は、レイヤーの色(およびレイヤーの順序:常に上)で簡単に識別できるようにしました!
- (これがあなたに起こるならば)他のすべてのレイヤーの上に既に存在するレイヤーを選択し、Greyscale Switch を有効にすると、レイヤーを上に配置できないという エラー ウィンドウ が表示 されます。つまり、すべてのレイヤーの最上位の順序が既に選択されており、自動操作は単に冗長化されています。
保証
.clip ファイルまたはフラットイメージ (PNG、JPG、TIFF など) でグレースケール スイッチを使用できます。
このグレースケールプレビューは、アートワークの値を確認するのに最適です。気がする時はいつでも使ってよ!
結論
すべてのことを読んで、グレースケールスイッチをダウンロードしてくれてありがとう!私はこれがそれを必要とする人に役立つことを願っています。グレースケールスイッチを使用しているときにエラーが発生した場合は、Twitterで私に連絡してください(プロフィールを参照)。
アップロードしたアセットの方向を実際に読み取っている人に感謝しています。私は多くのことを書くので、私はクリップスタジオペイントを使用して私の経験から学んだことを共有するのが大好きです。
さて、次回まで人々!( o w < )Vm
Imagine this illustration isn't flat yet, meaning all the layers are still there.
Greyscale Switch will NOT flatten all your layers, it will NOT change any of your layers and effects. It will only create a correction layer to show the greyscale version.
- go to menu tab > LAYER > New Correction Layer > Hue/Saturation/Luminosity
- slide down the Saturation level to "-100"
- click ok
You'll notice that the Hue and Luminosity aren't changed (all remain 0), which means this Greyscale Switch is loyal to your coloured art.
- go to menu tab> LAYER > New Layer > Fill
- pick the blackest of the black or hex#000000 (using pure black is the best colour to pick to create a greyscale preview)
- set the blending mode to either Hue or Color
- keep this fill layer on the top of all your layers always
- voíla!
- [ MASK LAYER: OFF ] : the correction layer does not have the mask layer. so that when you use this autoaction, the Greyscale Switch will show everything grey!
- [ MASK LAYER: ON ] : the mask layer created when making a correction layer is retained. So that you can edit out the what part of the art will look grey.
IMPORTANT
- Both sets of the Greyscale Switch will automatically put the correction layer (the thing that's creating the greyscale preview) at the TOP of all your layers. I'm mentioning this in case you don't need your other layers to be greyscale.
- You can export/save as your artwork while the Greyscale Switch is on. If you ever need it. Just export as (into your prefered image format) or save as.
- The Greyscale Switch sets are originally in english. So to change the name of Greyscale Switch layer, do the steps below...
- go to the auto-action window
- open Greyscale Switch (and turn "off" the button mode if you have it "on")
- click the arrow pointing to the set name, and dinffind the "Change Layer Name" command
- click the square box, and that's it!
Now every time you activate/play the auto-ction set, the greyscale switch will ask you to rename it. But because that automatic renaming is such a hassle, I made the correction layer of both action sets to have layer palette colours (hex#595959) so that if you get lazy to rename the correction layer, then you can easily identify it with the layer colour (and the layer order: always on top)!
- (If this will ever happen to you) If you select a layer already on top of all the other layers, and then you activate Greyscale Switch, and then an error window will appear asking you that the layer can not be put to the top: just click OK to continue. This means that you have already selected the top order of all the layers, and that the auto-action is just being redundant.
GUARANTEE
You can use Greyscale Switch on your .clip files or any flat images (PNG, JPG, TIFF, etc.).
This greyscale preview is best used to check the values on your artwork. Use it whenever you feel like it!
CONCLUSION
Thanks for reading all that and for downloading Greyscale Switch! I hope this is helpful to those who need it. If there's any errors when you're using Greyscale Switch, contact me in twitter (see my profile).
I highly appreciate the people that actually read all the directions of my uploaded assets. Because I write a lot and I love sharing what I've learnt from my experiences using clip studio paint.
Alright, until next time folks! ( o w < )Vm