Interruptor en escala de grises v.1 [OUTDATED] (Greyscale Switch v.1 [OUTDATED]) Greyscale Switch v.1 [OUTDATED]
Content ID:1768770
-
1 465
Auto-acción básica y sin complicaciones: Interruptor de escala de grises. Perfecto para sus necesidades de verificación de valor! Hassle-Free, Basic Auto-action: Greyscale Switch. Perfect for your Value checking needs!
Imagina que esta ilustración aún no es plana, lo que significa que todas las capas siguen ahí.
Greyscale Switch NO aplanará todas sus capas, NO cambiará ninguna de sus capas y efectos. Solo creará una capa de corrección para mostrar la versión en escala de grises.
- ir a la pestaña de menú > CAPA > Nueva capa de corrección > Tono / Saturación / Luminosidad
- deslice hacia abajo el nivel de Saturación a "-100"
- clic Ok
Notarás que el Tono y la Luminosidad no se cambian (todos permanecen 0), lo que significa que este Interruptor en Escala De Grises es leal a tu arte de color.
- ir a la pestaña de menú> CAPA > Nueva capa > Relleno
- elegir el más negro del negro o hexagonal #000000 (el uso de negro puro es el mejor color para elegir para crear una vista previa en escala de grises)
- establecer el modo de fusión en Tono o Color
- mantener esta capa de relleno en la parte superior de todas sus capas siempre
- voíla!
- [ CAPA DE MÁSCARA: DESACTIVADA ]: la capa de corrección no tiene la capa de máscara. para que cuando utilice esta autoacción, el ¡Greyscale Switch mostrará todo gris!
- [ CAPA DE MÁSCARA: ON ] : se conserva la capa de máscara creada al hacer una capa de corrección. Para que puedas editar la parte del arte se verá gris.
importante
- Ambos conjuntos del conmutador de escala de grises colocarán automáticamente la capa de corrección (lo que está creando la vista previa en escala de grises) en la PARTE SUPERIOR de todas las capas. Menciono esto en caso de que no necesites que tus otras capas sean en escala de grises.
- Puede exportar/guardar como ilustración mientras el conmutador en escala de grises está activado. Si alguna vez lo necesitas. Simplemente exporte como (en su formato de imagen preferido) o guárdelo como.
- Los conjuntos de interruptores de escala de grises están originalmente en inglés. Así que para cambiar el nombre de la capa Greyscale Switch, haga los pasos a continuación...
- ir a la ventana de acción automática
- abrir interruptor en escala de grises (y desactivar " el modo de botón si lo tiene "encendido")
- click the arrow pointing to the set name, and dinffind the "Change Layer Name" command
- haga clic en el cuadro cuadrado, y eso es todo!
Ahora, cada vez que actives/reproduzcas el juego de autocción, el interruptor en escala de grises te pedirá que lo cambies de nombre. Pero debido a que el cambio de nombre automático es una molestia, hice que la capa de corrección de ambos conjuntos de acciones tuviera colores de paleta de capas (hexagonal#595959) para que si te vuelves perezoso cambie el nombre de la capa de corrección, entonces puedes identificarla fácilmente con el color de la capa (y el orden de capa: siempre en la parte superior)!
- (Si esto te sucederá alguna vez) Si selecciona una capa que ya está encima de todas las demás capas y, a continuación, activa El conmutador en escala de grises y, a continuación, aparecerá una ventana de error pidiéndole que la capa no se pueda colocar en la parte superior: simplemente haga clic en Aceptar para continuar. Esto significa que ya ha seleccionado el orden superior de todas las capas y que la acción automática solo está siendo redundante.
garantía
Puede utilizar Greyscale Switch en sus archivos .clip o cualquier imagen plana (PNG, JPG, TIFF, etc.).
Esta vista previa en escala de grises se utiliza mejor para comprobar los valores de la ilustración. ¡Úsalo cuando quieras!
conclusión
Gracias por leer todo eso y por descargar Greyscale Switch! Espero que esto sea útil para aquellos que lo necesitan. Si hay algún error cuando usas Greyscale Switch, ponte en contacto conmigo en Twitter (consulta mi perfil).
Agradezco mucho a las personas que realmente leen todas las direcciones de mis activos subidos. Porque escribo mucho y me encanta compartir lo que he aprendido de mis experiencias usando pintura de estudio de clip.
¡Muy bien, hasta la próxima vez! ( o w <) Vm
Imagine this illustration isn't flat yet, meaning all the layers are still there.
Greyscale Switch will NOT flatten all your layers, it will NOT change any of your layers and effects. It will only create a correction layer to show the greyscale version.
- go to menu tab > LAYER > New Correction Layer > Hue/Saturation/Luminosity
- slide down the Saturation level to "-100"
- click ok
You'll notice that the Hue and Luminosity aren't changed (all remain 0), which means this Greyscale Switch is loyal to your coloured art.
- go to menu tab> LAYER > New Layer > Fill
- pick the blackest of the black or hex#000000 (using pure black is the best colour to pick to create a greyscale preview)
- set the blending mode to either Hue or Color
- keep this fill layer on the top of all your layers always
- voíla!
- [ MASK LAYER: OFF ] : the correction layer does not have the mask layer. so that when you use this autoaction, the Greyscale Switch will show everything grey!
- [ MASK LAYER: ON ] : the mask layer created when making a correction layer is retained. So that you can edit out the what part of the art will look grey.
IMPORTANT
- Both sets of the Greyscale Switch will automatically put the correction layer (the thing that's creating the greyscale preview) at the TOP of all your layers. I'm mentioning this in case you don't need your other layers to be greyscale.
- You can export/save as your artwork while the Greyscale Switch is on. If you ever need it. Just export as (into your prefered image format) or save as.
- The Greyscale Switch sets are originally in english. So to change the name of Greyscale Switch layer, do the steps below...
- go to the auto-action window
- open Greyscale Switch (and turn "off" the button mode if you have it "on")
- click the arrow pointing to the set name, and dinffind the "Change Layer Name" command
- click the square box, and that's it!
Now every time you activate/play the auto-ction set, the greyscale switch will ask you to rename it. But because that automatic renaming is such a hassle, I made the correction layer of both action sets to have layer palette colours (hex#595959) so that if you get lazy to rename the correction layer, then you can easily identify it with the layer colour (and the layer order: always on top)!
- (If this will ever happen to you) If you select a layer already on top of all the other layers, and then you activate Greyscale Switch, and then an error window will appear asking you that the layer can not be put to the top: just click OK to continue. This means that you have already selected the top order of all the layers, and that the auto-action is just being redundant.
GUARANTEE
You can use Greyscale Switch on your .clip files or any flat images (PNG, JPG, TIFF, etc.).
This greyscale preview is best used to check the values on your artwork. Use it whenever you feel like it!
CONCLUSION
Thanks for reading all that and for downloading Greyscale Switch! I hope this is helpful to those who need it. If there's any errors when you're using Greyscale Switch, contact me in twitter (see my profile).
I highly appreciate the people that actually read all the directions of my uploaded assets. Because I write a lot and I love sharing what I've learnt from my experiences using clip studio paint.
Alright, until next time folks! ( o w < )Vm