Up and down Windows-Wall 3.0 m (上下窓-壁3.0m) 上下窓-壁3.0m

Content ID:1840131

  • 521
This material can be used in Studio Mode. (What is Studio Mode?)

※ Please note that the thickness is decreased to one of three object/in particular.

※ 3.0 m is quite different in size from the previous version!


Samune also lost the data created comparison figures, I'm sorry...

If you want the same thing as the comparison chart below, Samune,
Please also DL from the previous version at the bottom.


It is 3D of the raising and lowering window for the indoor side. The color is for the LT conversion for visibility.
Please be careful because there is not a lock and a hook because it is considerably simplified for the background of distance.
The backside cannot be used. The windows are working. This is the type that moves down. )

※ The object of the full wall with no windows with the same molding
If you want to extend the left and right wall, so I deleted, but sorry to trouble you
The processing such as removing the window part after the LT conversion is requested.

-----

The standard value of the UK is prepared by reference.
The height of the ceiling (wall) is 2.4 m, 2.7 m, and 3 kinds of 3.0 m are distributed, and, please choose it according to the application.

▼ AIM
2.4 m... General housing
2.7 m... Living room, large floor and small shops
3.0 m... Medium or large stores


This is the height of the ceiling (wall) 3.0 m, window sash (large) about 46cm, (medium) about 76cm, (small) about 107cm.


Size comparison figure. (The sofa is a separate distribution material, 3D doll is 175cm. )
※ ↓ Is an old version

↓ Current version (sorry I can not prepare comparative figure...)



You can choose three kinds of window size layout preset.

The total length of the wall is also available two meters and 4m.

↓ LT Conversion figure (4m, Large)



It is possible to hide each of these structures.



↓ After applying two narrow wall (2) and lined up, and displaying the left and right walls from the object list




↓ Because you do not have a moving setting, when you want to open the window, please select the parts and move up



I might be able to use it somehow depending on the color retouching.

↓ To display the parallel light 2 to adjust the Shadows rasterize, spaciousness the green, adjust the color gradient map, and Blur (2.7 m)

↓ The one that was processed in conjunction with the sofa of the distribution (of 3.0 m)



※細部修正/3つのオブジェクトを1つに/特に厚みが減っているのでご注意下さい

※3.0mは旧バージョンから大きさがかなり変わっています!


サムネも比較図も作成データ無くしたのでそのままです、すみません…

サムネ・以下の比較図と同じものが欲しい方はお手数ですが
下部の旧バージョンからもDLをお願いします。


室内側用の上げ下げ窓の3Dです。色は可視性の為でLT変換用。
遠目の背景用でだいぶ簡略化していてロックやフックもないのでご注意ください。
裏面は使えません。窓は稼働。(下を動かす形式です。)

※同じモールディングの付いた窓無しの全面壁のオブジェクトは
削除してしまったので、左右の壁を延長したい場合はお手数ですが
LT変換後に窓部分を削除するなどの加工をお願いします。

-----

UKの標準値を参考に作成。
天井(壁)の高さ2.4m、2.7m、3.0mの3種配布しているので、用途に応じて選んでください。

▼目安
2.4m…一般住宅
2.7m…リビングなど広いフロアや小規模店舗
3.0m…中規模以上の店舗等


こちらは天井(壁)の高さ3.0m、窓のサッシ下 (大) 約46cm、(中) 約76cm、(小) 約107cm


サイズ比較図。(ソファは別配布素材、3D人形は175cm。)
※↓旧バージョンです

↓現バージョン(比較図用意できなくてすみません…)



窓のサイズ3種をレイアウトプリセットから選べます。

また壁の全長も2mと4mの2種用意されています。

↓LT変換図(4m、大)



↓こういう構造になっています それぞれ非表示にすることも可能



↓壁2m(狭)を適用して2つ並べたあと、オブジェクトリストから左右の壁を表示したもの




↓可動設定はしていないので、窓を開けたい時はパーツを選んで上に移動して下さい



カラーでもレタッチ次第でなんとか使えるかもしれません。

↓平行光2を表示して影を調整してラスタライズし、窓外に緑を加筆、グラデーションマップで色味を調整、ぼかしたもの(2.7mのもの)

↓別配布のソファと合わせて加工したもの(3.0mのもの)



Material マテリアル

  • default material 初期マテリアル

disposition 配置

  • Wide-Large 幅広-大
  • Wide-Medium 幅広-中
  • Wide Small 幅広-小
  • Narrow- large 幅狭-大
  • Narrow-medium 幅狭-中
  • Narrow-small 幅狭-小

Old version

Content ID:1840131

Published : 2 years ago

Last updated : 1 year ago

horitora's profile Go to profile

アップや無料期間を逃したくない方はTwitterのフォローをお願いします■価格は需要や他素材とのバランス等を鑑み、告知無しに変動します。■ブログにおすすめ素材や価格帯によるまとめ、類似素材の比較、3Dデッサン人形の2人ポーズの合わせかた等、クリスタ関係の便利なトピック等色んなお役立ち記事があるので、是非覗いてみてください!(プロフィールページ→ヘッダー右下のアイコンから)