Unfortunately it is "mock", but I made it because it was necessary for me as a subsidy. 残念ながら”もどき”でありますが、自分にとっても補助として必要だったので作りました。
* Introduction
Supplementary: the layer of the processing system is temporarily hidden recommended .
* Non-normal condition *
In this way, the black and white range (layer mask) is not in the form of line drawing
This is the result of a non-successful operation .
I was able to check if there is a colored layer county in the line-drawing folder
Please check.
Shape of line drawing
This is the normal working state.
One click (GIF will be played)
In addition, "OA" that is included in the line drawing color Torres OA_F layer for line drawing
You can hide the line art folder and make it a line drawing for the layer used for the color Torres. (GIF plays)
Because I assume a full color, the effect does not come out neatly in the coloring of only a part
It works fine in half a color if I use it for no background.
If you are picking too much ground color, please reduce the layer concentration.
A comparison of 100% concentration on the base and lower concentration by 55%
-In OA, which makes the layer a line drawing, it uses tone curve to replace the hard light effect.
In this auto action, the color Torres OA that does not work without the black line drawing
It is the one devised as a breakthrough measures to eliminate the state that the edge of a color-Torres layer is possible when a line drawing layer is below.
All layers of this film are created at the top of the layer county.
If you move to the line art folder, you can just resume processing from the top.
I want to be able to have fun drawing!
※はじめに
補足:加工系のレイヤーなどは一時非表示推奨です。
※非正常な状態について※
このように黒と白で出来た範囲(レイヤーマスク)が線画の形ではない状態は
非正常に動作した場合の結果です。
確認出来たのは 線画フォルダ内に着色されたレイヤー郡がある場合 です
ご確認下さい。
線画の形
こちらが正常に動作した状態です
あとはワンクリックで(GIFが再生されます)
また、同梱の『線画色トレスOA_Fレイヤーを線画用にするOA』では
線画フォルダを非表示にし、色トレスに使用されたレイヤーを線画に仕立てる事ができます。(GIFが再生されます)
フルカラーを想定しているので一部のみの着色では綺麗に効果は出ませんが
背景なし用を使用すればカラー半分でも問題なく動作します。
・下地の色を拾いすぎている場合はレイヤー濃度を下げてご使用下さい
下地を拾いすぎている濃度100%と濃度を55%に下げた比較
・レイヤーを線画用にするOAではトーンカーブを使ってハードライト効果の代替としています。
このオートアクションは、黒線画がないと機能しない色トレスOAに対し
線画レイヤーが下にあると色トレスレイヤーのふちに黒い囲みが出来る状態を解消するための打開策として考案したものです。
本作のレイヤーは全てレイヤー郡のトップに作成されます。
線画フォルダの中に移動するなどすれば、加工は上からそのまま再開できます。
楽しくお絵かきができますように!